Skip to content
TapBuff

Schwenksville Borough Auth

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 10 were found.

Serves 5,200 people · Surface water bought from another system · Schwenksville, PA

Serves
5,200 people
Connections
1,827
Water source
Surface water bought from another system
Based in
Schwenksville, PA
County
Montgomery
Owner
Local government
The 4 ZIP codes it serves

18074, 19473, 19478, 19492

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 19, 2024 to Aug. 7, 2026, with EPA’s UCMR 5 samples, 2023 to 2024, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from April 11, 2023 to Jan. 17, 2024.

Uranium, arsenic, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), chromium (total) and fluoride: Pennsylvania’s own results, samples taken from Feb. 7, 2020 to Sept. 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

8.7 ppt

Highest sample, Feb. 2, 2024; found in 23 of 30

2026 average: 3.9 ppt

The highest sample was 8.7 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its six samples averaged 3.9 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 7.8 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, found it in 6 of 8, the highest 8.3 ppt.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

6.3 ppt

Highest sample, Feb. 2, 2024; found in 25 of 30

2026 average: 2.7 ppt

The highest sample was 6.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its six samples averaged 2.7 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 5.8 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 14 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, found it in 3 of 8, the highest 5.4 ppt.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

45.7 ppb

Highest sample, April 11, 2023; found in 8 of 8

The highest sample was 45.7 ppb, about 4.6 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 27 ppb

Highest yearly average, 2023 to 2026 · 2026 average: 14.4 ppb · Comes from the source

Averaged by year, the highest was 27 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15 ppb, in 2012.

What handles it

About uranium
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 6.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.5 ppb · Comes from the source

Averaged by year, the highest was 6.5 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 12 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 11 ppb, in 2016, and EPA recorded a violation in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 31.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 25.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 31.5 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 54.8 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 17.2 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFNA, EPA’s 2029 limit 10 ppt; highest 1.9 ppt

Highest sample, July 5, 2024; found in 1 of 21 · 2026: not found · Comes from the source

The highest sample was 1.9 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, it wasn’t found in any of its six samples.

How it’s judged

Averaged over four quarters at one entry point, the way EPA’s limit is judged, the highest was 0 ppt, for the year to June 30, 2025: below EPA’s new limit of 10 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, didn’t find it in any of 8.

What handles it

About PFNA
Nitrate, Legal limit 10 ppm; highest 1.5 ppm

Highest sample; found in 19 of 28 · 2026 average: 0.6 ppm · Comes from the source

The highest sample, in 2024, was 1.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.7 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 5.8 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 5.8 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 10.0 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.0 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 4.5 ppt

Highest sample, Oct. 4, 2024; found in 17 of 21 · 2026 average: 2.5 ppt · Comes from the source

The highest sample was 4.5 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its six samples averaged 2.5 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, found it in 5 of 8, the highest 5.3 ppt.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)6.3 ppt highest, found in 25 of 30 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)8.7 ppt highest, found in 23 of 30 samples. Details
PFHxS10 pptNot foundNot found in any of 21 samples
PFNA10 pptBelow EPA’s limits1.9 ppt highest, found in 1 of 21 samples. Details
HFPO-DA (GenX)10 pptNot foundNot found in any of 21 samples
PFBSIndex onlyBelow EPA’s limits4.5 ppt highest, found in 17 of 21 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Fluoride
  • Lead

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFHxS

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Schwenksville Borough Auth reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2023 to 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for arsenic. It began Oct. 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2016 to Dec. 31, 2016, 11 ppbResolved

Health-based violations only. 19 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Uranium, arsenic, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), chromium (total) and fluoride results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Schwenksville Borough Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 11, 2023 to Jan. 17, 2024; Pennsylvania’s results run from Feb. 7, 2020 to Sept. 8, 2026; Pennsylvania’s PFAS results run from Jan. 19, 2024 to Aug. 7, 2026.

Testing your own tap

Schwenksville Borough Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Schwenksville Borough Auth’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Schwenksville Borough Auth’s results flag: PFOS, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Schwenksville Borough Auth serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Schwenksville Borough Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Analytical Laboratories, Inc

    Telford, PA · about 7 miles

    Certified for bacteria, nitrate

    (215) 723-6466

  • Eurofins Philadelphia - Horsham

    Horsham, PA · about 19 miles

    Certified for bacteria

    (215) 355-3900

  • Aqua Pennsylvania, Inc.

    Bryn Mawr, PA · about 20 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (610) 525-1400

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA1460042. Rebuilt from EPA data on Oct. 25, 2026.