Skip to content
TapBuff

PA American Water Co Kane

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 5 were found.

Serves 5,725 people · Surface water · New Castle, PA

Serves
5,725 people
Connections
2,300
Water source
Surface water
Based in
New Castle, PA
County
McKean
Owner
Private
The ZIP code it serves

16735

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 16, 2024 to June 8, 2026, with EPA’s UCMR 5 samples, 2024, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Jan. 16 to Oct. 16, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium: Pennsylvania’s own results, samples taken from Feb. 4, 2020 to Sept. 7, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

23 ppb

Highest sample, July 17, 2024; found in 2 of 4

The highest sample was 23 ppb, about 2.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 35.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 33.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 35.7 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 84.6 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43.3 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 11.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 7.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 11.3 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 20.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13.6 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.66 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.63 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.66 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.69 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.81 ppm, in 2013.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.62 ppm

Highest sample; found in 14 of 14 · 2026 average: 0.51 ppm · Comes from the source

The highest sample, in 2020, was 0.62 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.81 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Pennsylvania utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA
  • PFOA
  • PFOS

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

PA American Water Co Kane reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. PA American Water Co Kane’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 16 to Oct. 16, 2024; Pennsylvania’s results run from Feb. 4, 2020 to Sept. 7, 2026; Pennsylvania’s PFAS results run from Jan. 16, 2024 to June 8, 2026.

Testing your own tap

PA American Water Co Kane’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. PA American Water Co Kane’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What PA American Water Co Kane’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area PA American Water Co Kane serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area PA American Water Co Kane serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • White Oak Laboratory LLC

    Ridgway, PA · about 17 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (814) 772-5927

  • Pace Analytical Services, LLC - Dubois

    Dubois, PA · about 35 miles

    Certified for bacteria, nitrate

    (814) 371-6030

  • Cattaraugus County Department of Health Laboratory

    Olean, NY · about 37 miles

    Certified for bacteria

    (716) 701-3434

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA6420019. Rebuilt from EPA data on Oct. 25, 2026.