PA American Norristown
EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 12 were found.
Serves 88,885 people · Surface water · Norristown, PA
- Serves
- 88,885 people
- Connections
- 32,857
- Water source
- Surface water
- Based in
- Norristown, PA
- County
- Montgomery
- Owner
- Private
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 4, 2024 to Jan. 8, 2026, with EPA’s UCMR 5 samples, 2024, as the earlier record.
Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Jan. 4 to Oct. 9, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic, chromium (total) and uranium: Pennsylvania’s own results, samples taken from Jan. 7, 2020 to July 13, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOA, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFBA at 7.0 ppt: see them below.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
16.2 ppb
Highest sample, Oct. 9, 2024; found in 2 of 4
The highest sample was 16.2 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 8 results
PFOA, PFOS and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 3.6 ppt
Highest sample, Jan. 8, 2026; found in 2 of 6 · 2026, one sample: 3.6 ppt · Comes from the source
The highest sample was 3.6 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its one sample was 3.6 ppt.
How it’s judged
Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.8 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.
Earlier, EPA’s UCMR 5 samples
EPA’s UCMR 5 samples, 2024, didn’t find it in any of 4.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 47.3 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 34.8 ppb · Forms or is added in treatment
Averaged by year, the highest was 47.3 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 80.2 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 60.4 ppb, in 2017.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.2 ppt
Highest sample, Jan. 8, 2026; found in 1 of 6 · 2026, one sample: 2.2 ppt · Comes from the source
The highest sample was 2.2 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its one sample was 2.2 ppt.
How it’s judged
Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.
Earlier, EPA’s UCMR 5 samples
EPA’s UCMR 5 samples, 2024, didn’t find it in any of 4.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 20.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 16.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 20.5 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 49.7 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 27.5 ppb, in 2017.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 2.9 ppm
Highest sample; found in 7 of 7 · 2026, one sample: 2.5 ppm · Comes from the source
The highest sample, in 2021, was 2.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 3.1 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb
90th percentile, 2025 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.11 ppm
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.11 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.12 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
PFBS, Health benchmark 2,000 ppt; highest 3.9 ppt
Highest sample, Jan. 2, 2025; found in 2 of 2 · 2026, one sample: 3.6 ppt · Comes from the source
The highest sample was 3.9 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its one sample was 3.6 ppt.
Earlier, EPA’s UCMR 5 samples
EPA’s UCMR 5 samples, 2024, found it in 2 of 4, the highest 5.3 ppt.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Below EPA’s limits3.6 ppt highest, found in 2 of 6 samples. Details |
| PFOS | 4.0 ppt | Below EPA’s limits2.2 ppt highest, found in 1 of 6 samples. Details |
| PFHxS | 10 ppt | Not foundNot found in any of 2 samples |
| PFNA | 10 ppt | Not foundNot found in any of 2 samples |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 2 samples |
| PFBS | Index only | Below EPA’s limits3.9 ppt highest, found in 2 of 2 samples. Details |
| Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFBA | 7.0 ppt | 2 of 4 | None covers it |
| PFPeA | 6.9 ppt | 2 of 4 | None covers it |
| PFHxA | 5.0 ppt | 2 of 4 | None covers it |
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Uranium
PFAS, from Pennsylvania’s own monitoring
- HFPO-DA (GenX)
- PFHxS
- PFNA
From EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFMBA
- PFMPA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 22 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.
- NSF/ANSI 53
Claims: PFOA Reduction, PFOS Reduction, Lead Reduction
For: PFOA, PFOS, Lead
Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction
For: PFOA, PFOS, Lead
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOA, PFOS, Lead
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOA, PFOS, Lead
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOA, PFOS, Lead
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOA, PFOS, Lead
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOA, PFOS, Lead
Every filter for these, those that cover all 3 first
Disinfectant
PA American Norristown reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA. It also reported permanganate and ultraviolet light.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic, chromium (total) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. PA American Norristown’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 4 to Oct. 9, 2024; Pennsylvania’s results run from Jan. 7, 2020 to July 13, 2026; Pennsylvania’s PFAS results run from Jan. 4, 2024 to Jan. 8, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. PA American Norristown’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What PA American Norristown’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area PA American Norristown serves, or a kit by mail
The 3 labs Pennsylvania certifies closest to the area PA American Norristown serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Aqua Pennsylvania, Inc.
Bryn Mawr, PA · about 9 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity
Eurofins Philadelphia - Horsham
Horsham, PA · about 10 miles
Certified for bacteria
Analytical Laboratories, Inc
Telford, PA · about 12 miles
Certified for bacteria, nitrate
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportPA American Norristown must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, PFAS results read Oct. 17, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, results from Jan. 2, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Pennsylvania DEP Laboratory Accreditation Program, accredited labs for drinking water, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID PA1460046. Rebuilt from EPA data on Oct. 25, 2026.