Skip to content
TapBuff

Nanty Glo Water Auth

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 7 were found.

Serves 3,152 people · Surface water · Nanty Glo, PA

Serves
3,152 people
Connections
1,454
Water source
Surface water
Based in
Nanty Glo, PA
County
Cambria
Owner
Local government
The 4 ZIP codes it serves

15931, 15943, 15948, 15960

The short answer

Haloacetic acids (HAA5) averaged above its legal limit’s level in 2026, with no violation recorded. 9 health-based violations since 2016, 2 with no fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead and arsenic, if you want them lower⁠The 9 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 6, 2024 to Jan. 6, 2026, with EPA’s UCMR 5 samples, 2023, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from March 20 to Dec. 11, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2022.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic, chromium (total) and uranium: Pennsylvania’s own results, samples taken from March 3, 2020 to Sept. 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 20.9 ppt: see it below.

Above the limit’s level, no violation recorded, 1 result

Haloacetic acids (HAA5)

Forms or is added in treatment

Above the limit’s level, no violation

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health.

85 ppb

Highest yearly average, 2020 to 2026

Averaged by year, the highest was 85 ppb, in 2026, above EPA’s legal limit of 60 ppb. Its highest single sample was 130 ppb. That was also the latest year on file. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

How it’s judged

EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 75.1 ppb, in 2015, and EPA recorded violations in 2015 and 2016.

What handles it

No certification claim covers this compound yet.

Below EPA’s limits, 5 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 62.3 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 62.3 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 114 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 72.8 ppb, in 2014, and EPA recorded a violation in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 2.0 ppm

Highest sample; found in 6 of 7 · 2026, one sample: 1.9 ppm · Comes from the source

The highest sample, in 2025, was 2.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.9 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.7 ppb

90th percentile, 2022 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.04 ppm

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.04 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.065 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.065 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA20.9 ppt1 of 4None covers it
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA
  • PFOA
  • PFOS

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

9 health-based violations since 2016, 5 for total Haloacetic Acids (HAA5), 3 for total organic carbon and 1 for the Groundwater Rule. The latest began April 1, 2026, and 2 have no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total organic carbonNot enough organic matter was removed. It reacts with disinfectant to form byproducts.EPA: Treatment Technique Precursor RemovalApril 1, 2026 to June 30, 2026No fix on recordEPA: archived
Jan. 1, 2026 to March 31, 2026No fix on recordEPA: archived
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyJuly 6, 2024Resolved
Total organic carbonNot enough organic matter was removed. It reacts with disinfectant to form byproducts.EPA: Treatment Technique Precursor RemovalOct. 1, 2018 to Dec. 31, 2018Resolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2016 to Sept. 30, 2016Resolved
The other 4, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2016 to June 30, 2016Resolved
April 1, 2016 to June 30, 2016Resolved
Jan. 1, 2016 to March 31, 2016Resolved
Jan. 1, 2016 to March 31, 2016Resolved

Health-based violations only. 22 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Nanty Glo Water Auth reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic, chromium (total) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Nanty Glo Water Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 20 to Dec. 11, 2023; Pennsylvania’s results run from March 3, 2020 to Sept. 1, 2026; Pennsylvania’s PFAS results run from Feb. 6, 2024 to Jan. 6, 2026.

Testing your own tap

Nanty Glo Water Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Nanty Glo Water Auth’s latest lead sampling in EPA’s records, 2022, had a 90th percentile of 2.7 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Nanty Glo Water Auth’s results flag: haloacetic acids (HAA5). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Nanty Glo Water Auth serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Nanty Glo Water Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Cardan Laboratories Inc

    Northern Cambria, PA · about 11 miles

    Certified for bacteria

    (814) 948-8650

  • Chemstream Lab Services

    Homer City, PA · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity

    (724) 915-8388

  • Pace Analytical Services, LLC-Indiana

    Indiana, PA · about 20 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (724) 463-8378

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA4110023. Rebuilt from EPA data on Oct. 25, 2026.