Skip to content
TapBuff

Mun Water Auth of Aliquippa

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 15 were found.

Serves 15,685 people · Groundwater · Aliquippa, PA

Serves
15,685 people
Connections
6,154
Water source
Groundwater
Based in
Aliquippa, PA
County
Beaver
Owner
Local government
The 3 ZIP codes it serves

15001, 15050, 15061

The short answer

Lead is above the action level in the latest monitoring period, ending June 30, 2024. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 16, 2024 to July 23, 2026, with EPA’s UCMR 5 samples, 2025, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Jan. 28 to Aug. 5, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from July 13, 2020 to July 9, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA, PFOS, PFNA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFBA at 5.3 ppt: see them below.

Above the legal limit, 1 result

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

33.5 ppb

90th percentile, 2024

In the latest period, 9 in 10 homes sampled were at or below 33.5 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits, 10 results

PFOA, PFOS and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 3.2 ppt

Highest sample, May 1, 2025; found in 12 of 15 · 2026, one sample: 2.2 ppt · Comes from the source

The highest sample was 3.2 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its one sample was 2.2 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 2.2 ppt, for the year to Dec. 31, 2025: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFOA
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.8 ppt

Highest sample, July 23, 2026; found in 8 of 14 · 2026, one sample: 2.8 ppt · Comes from the source

The highest sample was 2.8 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its one sample was 2.8 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 1.1 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFOS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 46.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 33.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.8 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 55 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 53.3 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 14.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 9.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 14.3 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 15.8 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.2 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFNA, EPA’s 2029 limit 10 ppt; highest 1.9 ppt

Highest sample, May 1, 2025; found in 5 of 10 · 2026, one sample: 0.79 ppt · Comes from the source

The highest sample was 1.9 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, its one sample was 0.79 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way EPA’s limit is judged, the highest was 0.47 ppt, for the year to Dec. 31, 2025: below EPA’s new limit of 10 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFNA
PFHxS, EPA’s 2029 limit 10 ppt; highest 1.1 ppt

Highest sample, Oct. 15, 2024; found in 3 of 10 · 2026, one sample: 1.1 ppt · Comes from the source

The highest sample was 1.1 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, its one sample was 1.1 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way EPA’s limit is judged, the highest was 0 ppt, for the year to Dec. 31, 2025: below EPA’s new limit of 10 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFHxS
Nitrate, Legal limit 10 ppm; highest 0.76 ppm

Highest sample; found in 10 of 10 · 2026, one sample: 0.52 ppm · Comes from the source

The highest sample, in 2025, was 0.76 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.78 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.29 ppb

Highest yearly average, 2021 to 2025 · Comes from the source

Averaged by year, the highest was 0.29 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That was also the latest year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Chromium (total), Legal limit 100 ppb; highest yearly average 2.6 ppb

Highest yearly average, 2021 to 2025 · Comes from the source

Averaged by year, the highest was 2.6 ppb, in 2025, below EPA’s legal limit of 100 ppb. That was also the latest year on file.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 2.3 ppt

Highest sample, July 23, 2026; found in 9 of 12 · 2026, one sample: 2.3 ppt · Comes from the source

The highest sample was 2.3 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its one sample was 2.3 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 2.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits3.2 ppt highest, found in 12 of 15 samples. Details
PFOS4.0 pptBelow EPA’s limits2.8 ppt highest, found in 8 of 14 samples. Details
PFHxS10 pptBelow EPA’s limits1.1 ppt highest, found in 3 of 10 samples. Details
PFNA10 pptBelow EPA’s limits1.9 ppt highest, found in 5 of 10 samples. Details
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples
PFBSIndex onlyBelow EPA’s limits2.3 ppt highest, found in 9 of 12 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA5.3 ppt1 of 1None covers it
PFPeA2.1 ppt1 of 1None covers it
PFHxA1.4 ppt1 of 1None covers it
PFHpA0.51 ppt1 of 1NSF/ANSI 53: Total PFAS Reduction
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Fluoride
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NFDHA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFPeS
  • PFUnA

From EPA’s UCMR 5 sampling

  • Lithium
  • NEtFOSAA
  • NMeFOSAA
  • PFTA
  • PFTrDA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Lead Reduction, PFOA Reduction, PFOS Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, PFOA, PFOS, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, PFOA, PFOS, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Mun Water Auth of Aliquippa reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

3 health-based violations since 2016, 2 for the Revised Total Coliform Rule and 1 for the Groundwater Rule. The latest began Oct. 20, 2025.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)Oct. 20, 2025Resolved
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Oct. 19, 2025Resolved
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)July 1, 2019 to July 31, 2019Resolved

Health-based violations only. 32 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mun Water Auth of Aliquippa’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 28 to Aug. 5, 2025; Pennsylvania’s results run from July 13, 2020 to July 9, 2026; Pennsylvania’s PFAS results run from Jan. 16, 2024 to July 23, 2026.

Testing your own tap

Mun Water Auth of Aliquippa’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Mun Water Auth of Aliquippa’s latest lead sampling in EPA’s records, 2024, had a 90th percentile of 33.5 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Mun Water Auth of Aliquippa serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Mun Water Auth of Aliquippa serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Allegheny County Health Department Public Health Laboratory

    Warrendale, PA · about 14 miles

    Certified for bacteria

    (412) 578-8070

  • Microbac Laboratories, Inc. Pittsburgh Division

    Warrendale, PA · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (724) 772-0610

  • Dream Pools and Spas Inc

    Pittsburgh, PA · about 25 miles

    Certified for bacteria

    (412) 661-7665

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA5040006. Rebuilt from EPA data on Oct. 25, 2026.