Skip to content
TapBuff

Morrisville Munic Authority

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 8 were found.

Serves 13,342 people · Surface water · Morrisville, PA

Serves
13,342 people
Connections
4,231
Water source
Surface water
Based in
Morrisville, PA
County
Bucks
Owner
Local government
The ZIP code it serves

19067

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 20 health-based violations since 2016, 1 with no fix on record in EPA’s file.

Filters for PFOA, PFOS, lead and uranium, if you want them lower⁠The 20 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 1, 2024 to March 12, 2026, with EPA’s UCMR 5 samples, 2025, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from March 5 to Dec. 10, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, uranium, arsenic, chromium (total) and fluoride: Pennsylvania’s own results, samples taken from Jan. 8, 2020 to July 7, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA and PFOS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFPeA at 3.0 ppt: see it below.

Below EPA’s limits, 7 results

PFOA, PFOS, lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 46.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 32.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 88 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 104 ppb, in 2018, and EPA recorded violations in 2014, 2015, 2016, 2018 and 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.2 ppt

Highest sample, Aug. 7, 2024; found in 1 of 5 · 2026: not found · Comes from the source

The highest sample was 2.2 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.55 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 4.

What handles it

About PFOA
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.1 ppt

Highest sample, Aug. 7, 2024; found in 1 of 5 · 2026: not found · Comes from the source

The highest sample was 2.1 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0.53 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2025, didn’t find it in any of 4.

What handles it

About PFOS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 41.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 29.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 41.7 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 93.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 77.2 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 1.2 ppm

Highest sample; found in 4 of 7 · 2026, one sample: 1.1 ppm · Comes from the source

The highest sample, in 2025, was 1.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.1 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1 ppb

Highest yearly average, 2023 · Comes from the source

Averaged by year, the highest was 1 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.15 ppb, in 2014.

What handles it

About uranium
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits2.2 ppt highest, found in 1 of 5 samples. Details
PFOS4.0 pptBelow EPA’s limits2.1 ppt highest, found in 1 of 5 samples. Details
PFHxS10 pptNot foundNot found in any of 3 samples
PFNA10 pptNot foundNot found in any of 3 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 3 samples
PFBSIndex onlyNot foundNot found in any of 3 samples
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.0 ppt1 of 4None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

20 health-based violations since 2016, 19 for total Haloacetic Acids (HAA5) and 1 for the Revised Total Coliform Rule. The latest began Jan. 26, 2025, and 1 has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)Jan. 26, 2025No fix on recordEPA: unaddressed
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2019 to Sept. 30, 2019, 65 ppbResolved
April 1, 2019 to June 30, 2019, 115 ppbResolved
April 1, 2019 to June 30, 2019, 101 ppbResolved
April 1, 2019 to June 30, 2019, 101 ppbResolved
The other 15, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2019 to March 31, 2019Resolved
Jan. 1, 2019 to March 31, 2019Resolved
Jan. 1, 2019 to March 31, 2019Resolved
Jan. 1, 2019 to March 31, 2019Resolved
Oct. 1, 2018 to Dec. 31, 2018Resolved
Oct. 1, 2018 to Dec. 31, 2018Resolved
Oct. 1, 2018 to Dec. 31, 2018Resolved
Oct. 1, 2018 to Dec. 31, 2018Resolved
July 1, 2018 to Sept. 30, 2018Resolved
July 1, 2018 to Sept. 30, 2018Resolved
July 1, 2018 to Sept. 30, 2018Resolved
July 1, 2016 to Sept. 30, 2016Resolved
April 1, 2016 to June 30, 2016Resolved
April 1, 2016 to June 30, 2016Resolved
Jan. 1, 2016 to March 31, 2016Resolved

Health-based violations only. 140 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, PFOS Reduction, Lead Reduction

    For: PFOA, PFOS, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction, Uranium

    For: PFOA, PFOS, Lead, Uranium

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 4 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Morrisville Munic Authority reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, uranium, arsenic, chromium (total) and fluoride results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Morrisville Munic Authority’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 5 to Dec. 10, 2025; Pennsylvania’s results run from Jan. 8, 2020 to July 7, 2026; Pennsylvania’s PFAS results run from Feb. 1, 2024 to March 12, 2026.

Testing your own tap

Morrisville Munic Authority’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Morrisville Munic Authority’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Morrisville Munic Authority serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Morrisville Munic Authority serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, LLC - Ewing

    Ewing, NJ · about 4 miles

    Certified for bacteria

    (609) 737-3477

  • Criterion Laboratories Inc

    Bensalem, PA · about 10 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (215) 244-1300

  • EMSL Analytical Inc

    Cinnaminson, NJ · about 17 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity, asbestos

    (800) 220-3675

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA1090037. Rebuilt from EPA data on Oct. 25, 2026.