Martins Community Lp MHP
What EPA’s and Pennsylvania’s records show in this utility’s water: PFAS; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 180 people
- Connections
- 96
- Water source
- Groundwater
- Based in
- Cochranville, PA
- County
- Chester
- Owner
- Private
- Hardness
- Hard
The ZIP code it serves
The short answer
2 results are above EPA’s new limit, which takes effect in 2029, and 1 more is above the health goal. The worst: PFOA, above EPA’s new limit (2029). No health-based violations on file since 2016.
What handles itWhat was found
PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 11, 2025 to Aug. 25, 2026.
Lead and copper: EPA SDWIS monitoring periods ending 1993 to 1996.
Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from March 25, 2020 to July 22, 2026, with EPA’s 2012 to 2019 file for earlier years.
PFAS: PFOA, PFOS, PFHxS, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFHxA at 2.5 ppt: see them below.
EPA’s 2024 PFAS rule, compound by compound
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)9.1 ppt highest, found in 5 of 5 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)7.4 ppt highest, found in 5 of 5 samples. Details |
| PFHxS | 10 ppt | Below EPA’s limits1.4 ppt highest, found in 1 of 5 samples. Details |
| PFNA | 10 ppt | Below EPA’s limits0.44 ppt highest, found in 1 of 5 samples. Details |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 5 samples |
| PFBS | Index only | Below EPA’s limits7.7 ppt highest, found in 5 of 5 samples. Details |
| Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here. | ||
About PFAS certifications
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
Above EPA’s new limit, which takes effect in 20292
PFOA
Comes from the source
9.1ppt
Highest sample, Aug. 25, 2026; found in 5 of 5
2026 average: 6.2 ppt
The highest sample was 9.1 ppt, about 2.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Compliance will be judged on a running annual average, not one sample. No entry point has four quarters of results in a row to average, the way both Pennsylvania’s limit and EPA’s are judged. In 2026, the latest year on file, its three samples averaged 6.2 ppt.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
PFOS
Comes from the source
7.4ppt
Highest sample, Aug. 25, 2026; found in 5 of 5
2026 average: 6.1 ppt
The highest sample was 7.4 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Compliance will be judged on a running annual average, not one sample. No entry point has four quarters of results in a row to average, the way both Pennsylvania’s limit and EPA’s are judged. In 2026, the latest year on file, its three samples averaged 6.1 ppt.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Above the health goal1
Lead
Comes from pipes, often your own
3.0ppb
90th percentile, 1996
In the latest period, 9 in 10 homes sampled were at or below 3.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Below EPA’s limits6
Nitrate
Comes from the source
9.9ppm
Highest sample; found in 26 of 26
2026 average: 5.0 ppm
The highest sample, in 2021, was 9.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged 5.0 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 8.9 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM)
Forms or is added in treatment
14.7ppb
Highest yearly average, 2021 to 2024
Averaged by year, the highest was 14.7 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 15.1 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 4.2 ppb, in 2015.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
PFHxS
Comes from the source
1.4ppt
Highest sample, June 12, 2025; found in 1 of 5
2026: not found
The highest sample was 1.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. No entry point has four quarters of results in a row to average, the way EPA’s limit is judged. In 2026, the latest year on file, it wasn’t found in any of its three samples.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
3.6ppb
Highest yearly average, 2021 to 2024
Averaged by year, the highest was 3.6 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 4.4 ppb. That was also the latest year on file.
What handles it
No certification claim covers this compound yet.
PFNA
Comes from the source
0.44ppt
Highest sample, June 12, 2025; found in 1 of 5
2026: not found
The highest sample was 0.44 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. No entry point has four quarters of results in a row to average, the way EPA’s limit is judged. In 2026, the latest year on file, it wasn’t found in any of its three samples.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
PFBS
Comes from the source
7.7ppt
Highest sample, March 12, 2026; found in 5 of 5
2026 average: 6.4 ppt
The highest sample was 7.7 ppt, below EPA’s hazard index benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its three samples averaged 6.4 ppt.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFHxA | 2.5 ppt | 1 of 1 | None covers it |
| PFHpA | 1.5 ppt | 1 of 1 | NSF/ANSI 53: Total PFAS Reduction |
15 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Fluoride
- Uranium
PFAS, from Pennsylvania’s own monitoring
- 11Cl-PF3OUdS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NMeFOSAA
- PFDA
- PFDoA
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”
- NSF/ANSI 53
Claims: PFOA Reduction, PFOS Reduction, Lead Reduction
For: PFOA, PFOS, Lead
Other certifiers’ wording: Total PFAS Reduction; Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)
- NSF/ANSI 58
Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction
For: PFOA, PFOS, Lead
At the tap, or for the whole house?
Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
ZeroWater 10 Cup Pitcher (ZP-010)
Pitcher
- IAPMO listing:NSF/ANSI 42NSF/ANSI 53checked Oct. 4, 2026
Certified for: PFOA, PFOS, Lead
Aquasana Claryum Direct Connect (AQ-MF-1)
Under-sink carbon
- IAPMO listing:NSF/ANSI 42NSF/ANSI 53NSF/ANSI 401checked Oct. 16, 2026
Certified for: PFOA, PFOS, Lead
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
- IAPMO listing:NSF/ANSI 42NSF/ANSI 53NSF/ANSI 401checked Oct. 16, 2026
Certified for: PFOA, PFOS, Lead
Under-sink reverse osmosis
- IAPMO listing:NSF/ANSI 42NSF/ANSI 53NSF/ANSI 58checked Oct. 4, 2026
Certified for: PFOA, PFOS, Lead
Under-sink reverse osmosis
- IAPMO listing:NSF/ANSI 42NSF/ANSI 53NSF/ANSI 58checked Oct. 9, 2026
Certified for: PFOA, PFOS, Lead
Hardness
Hard, typically 153 mg/L (8.9 grains per gallon), across 2 sampling points, in 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 18 monitoring or reporting violations: a sample missed, late or not reported.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Martins Community Lp MHP’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Pennsylvania’s results run from March 25, 2020 to July 22, 2026; Pennsylvania’s PFAS results run from March 11, 2025 to Aug. 25, 2026.
Testing your own tap
The 3 labs Pennsylvania certifies closest to the area Martins Community Lp MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
H.O. Thompson Testing Lab
Parkesburg, PA · about 17 miles
Certified for bacteria
Batta Laboratories LLC
Newark, DE · about 20 miles
Certified for asbestos
Brandywine Science Center
Kennett Square, PA · about 21 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Penn State Agricultural Analytical Services Laboratory: Drinking water test kits from many county Extension offices, mailed back to the lab overnight with payment. Packages cover bacteria and basic chemistry, with add-ons for nitrate, metals, lead, and mining or gas drilling concerns. The standard package of bacteria, pH and total dissolved solids is $60, or $70 with nitrate; bacteria alone is $40, nitrate $15 and lead $25. Drinking Water Testing, Penn State Agricultural Analytical Services Lab.
All 108 certified labs for PennsylvaniaSources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, PFAS results read Oct. 17, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, results from Jan. 2, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: Pennsylvania DEP Laboratory Accreditation Program, accredited labs for drinking water, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, results from June 5, 2024 to June 5, 2024, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID PA1150144. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Read up on the 3 results above a lineWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOA
- Get the utility’s own reportMartins Community Lp MHP must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Compare certified filtersWhat the filters certified for these results cost over five years, cartridges included.Compare five-year costs