Houtzdale Municipal Authority
EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 2 were found.
Serves 8,410 people · Surface water · Houtzdale, PA
- Serves
- 8,410 people
- Connections
- 2,862
- Water source
- Surface water
- Based in
- Houtzdale, PA
- County
- Clearfield
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.
What was found
Where these results come from, and when
PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 13, 2024 to June 10, 2026, with EPA’s UCMR 5 samples, 2024, as the earlier record.
Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from March 19 to Dec. 18, 2024.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.
Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, chromium (total), fluoride, nitrate and uranium: Pennsylvania’s own results, samples taken from Jan. 15, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 2 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 25.9 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 21.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 25.9 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 28.2 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 31 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 34 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 24.9 ppb · Forms or is added in treatment
Averaged by year, the highest was 34 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 34.7 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 27.5 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
36 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Fluoride
- Lead
- Nitrate
- Uranium
PFAS, from Pennsylvania’s own monitoring
- 11Cl-PF3OUdS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NMeFOSAA
- PFBS
- PFDA
- PFDoA
- PFHpA
- PFHxA
- PFHxS
- PFNA
- PFOA
- PFOS
- PFTA
- PFTrDA
- PFUnA
From EPA’s UCMR 5 sampling
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- Lithium
- NFDHA
- PFBA
- PFEESA
- PFHpS
- PFMBA
- PFMPA
- PFPeA
- PFPeS
Violations since 2016
1 health-based violation since 2016 for the Interim Enhanced Surface Water Treatment Rule. It began March 1, 2021.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Interim Enhanced Surface Water Treatment Rule | One cloudiness reading was above the maximum allowed.EPA: Single Turbidity Exceed (Enhanced SWTR) | March 1, 2021 to March 31, 2021, 1.5 NTU | Resolved |
Health-based violations only. 7 monitoring or reporting violations not shown.
Disinfectant
Houtzdale Municipal Authority reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, chromium (total), fluoride, nitrate and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Houtzdale Municipal Authority’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 19 to Dec. 18, 2024; Pennsylvania’s results run from Jan. 15, 2020 to July 15, 2026; Pennsylvania’s PFAS results run from March 13, 2024 to June 10, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Houtzdale Municipal Authority’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Houtzdale Municipal Authority serves, or a kit by mail
The 3 labs Pennsylvania certifies closest to the area Houtzdale Municipal Authority serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Pace Analytical Services, LLC - Altoona, PA
Altoona, PA · about 20 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity
Cardan Laboratories Inc
Northern Cambria, PA · about 25 miles
Certified for bacteria
Pace Analytical Services, LLC - Dubois
Dubois, PA · about 28 miles
Certified for bacteria, nitrate
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportHoutzdale Municipal Authority must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, PFAS results read Oct. 17, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, results from Jan. 2, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Pennsylvania DEP Laboratory Accreditation Program, accredited labs for drinking water, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID PA6170023. Rebuilt from EPA data on Oct. 25, 2026.