Skip to content
TapBuff

Hampton Shaler Water Authority

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 10 were found.

Serves 61,949 people · Surface water bought from another system · Allison Park, PA

Serves
61,949 people
Connections
25,955
Water source
Surface water bought from another system
Based in
Allison Park, PA
County
Allegheny
Owner
Local government
The 8 ZIP codes it serves

15044, 15101, 15116, 15209, 15215, 15223, 15237, 15238

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for PFOS, PFOA and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from April 9, 2024 to Sept. 9, 2026, with EPA’s UCMR 5 samples, 2023, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Feb. 16 to Nov. 2, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from Feb. 10, 2020 to Aug. 10, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA, PFHxS, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.

Below EPA’s limits, 10 results

PFOS, PFOA and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppb; highest 9.0 ppb

Highest sample, Aug. 24, 2023; found in 1 of 6 · Comes from the source

The highest sample was 9.0 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 3.6 ppt

Highest sample, Sept. 9, 2026; found in 10 of 14 · 2026 average: 2.4 ppt · Comes from the source

The highest sample was 3.6 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its three samples averaged 2.4 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 1.3 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 6.

What handles it

About PFOS
PFOA, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.2 ppt

Highest sample, Sept. 9, 2026; found in 3 of 14 · 2026 average: 1.6 ppt · Comes from the source

The highest sample was 2.2 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its three samples averaged 1.6 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 14 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 6.

What handles it

About PFOA
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 35.2 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 35.2 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 110 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 55.6 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 9.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 8.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 9.5 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 22.1 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 14.3 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFHxS, EPA’s 2029 limit 10 ppt; highest 1.3 ppt

Highest sample, July 21, 2026; found in 3 of 3 · 2026 average: 0.99 ppt · Comes from the source

The highest sample was 1.3 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. Its only year on file is 2026, when its three samples averaged 0.99 ppt.

How it’s judged

No entry point has four quarters of results in a row to average, the way EPA’s limit is judged.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 6.

What handles it

About PFHxS
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.3 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFNA, EPA’s 2029 limit 10 ppt; highest 0.53 ppt

Highest sample, July 21, 2026; found in 2 of 3 · 2026 average: 0.32 ppt · Comes from the source

The highest sample was 0.53 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. Its only year on file is 2026, when its three samples averaged 0.32 ppt.

How it’s judged

No entry point has four quarters of results in a row to average, the way EPA’s limit is judged.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 6.

What handles it

About PFNA
Nitrate, Legal limit 10 ppm; highest 0.34 ppm

Highest sample; found in 9 of 13 · 2026 average: 0.33 ppm · Comes from the source

The highest sample, in 2026, was 0.34 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.42 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFBS, Health benchmark 2,000 ppt; highest 3.7 ppt

Highest sample, Sept. 9, 2026; found in 3 of 3 · 2026 average: 2.9 ppt · Comes from the source

The highest sample was 3.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. Its only year on file is 2026, when its three samples averaged 2.9 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023, didn’t find it in any of 6.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptBelow EPA’s limits2.2 ppt highest, found in 3 of 14 samples. Details
PFOS4.0 pptBelow EPA’s limits3.6 ppt highest, found in 10 of 14 samples. Details
PFHxS10 pptBelow EPA’s limits1.3 ppt highest, found in 3 of 3 samples. Details
PFNA10 pptBelow EPA’s limits0.53 ppt highest, found in 2 of 3 samples. Details
HFPO-DA (GenX)10 pptNot foundNot found in any of 3 samples
PFBSIndex onlyBelow EPA’s limits3.7 ppt highest, found in 3 of 3 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Hampton Shaler Water Authority reported chloramine at 1 of its 2 sampling points and chlorine without chloramine at 1, in its 2023 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported permanganate.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic, chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Hampton Shaler Water Authority’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 16 to Nov. 2, 2023; Pennsylvania’s results run from Feb. 10, 2020 to Aug. 10, 2026; Pennsylvania’s PFAS results run from April 9, 2024 to Sept. 9, 2026.

Testing your own tap

Hampton Shaler Water Authority’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Hampton Shaler Water Authority’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 1.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Hampton Shaler Water Authority serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Hampton Shaler Water Authority serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins Pittsburgh

    Pittsburgh, PA · about 4 miles

    Certified for bacteria

    (412) 963-7058

  • Dream Pools and Spas Inc

    Pittsburgh, PA · about 5 miles

    Certified for bacteria

    (412) 661-7665

  • Allegheny County Health Department Public Health Laboratory

    Warrendale, PA · about 12 miles

    Certified for bacteria

    (412) 578-8070

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA5020019. Rebuilt from EPA data on Oct. 25, 2026.