Skip to content
TapBuff

Freeland Boro Muni Water Auth

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 10 were found.

Serves 4,610 people · Groundwater · Freeland, PA

Serves
4,610 people
Connections
2,425
Water source
Groundwater
Based in
Freeland, PA
County
Luzerne
Owner
Local government
The ZIP code it serves

18224

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 6, 2024 to July 8, 2026, with EPA’s UCMR 5 samples, 2024, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from April 24 to Oct. 16, 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 2004. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium: Pennsylvania’s own results, samples taken from March 10, 2020 to Sept. 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 4.3 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

12.3 ppt

Highest sample, April 23, 2025; found in 29 of 38

2026 average: 4.4 ppt

The highest sample was 12.3 ppt, about 3.1 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its nine samples averaged 4.4 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 9.9 ppt, for the year to June 30, 2025: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024, found it in 4 of 10, the highest 9.1 ppt.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

7.8 ppt

Highest sample, April 23, 2025; found in 27 of 41

2026 average: 3.2 ppt

The highest sample was 7.8 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its 10 samples averaged 3.2 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 5.7 ppt, for the year to March 31, 2026: below Pennsylvania’s limit of 14 ppt and above EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024, found it in 3 of 10, the highest 5.6 ppt.

What handles it

Below EPA’s limits, 6 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 3.3 ppm

Highest sample; found in 26 of 35 · 2026 average: 1.7 ppm · Comes from the source

The highest sample, in 2026, was 3.3 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its five samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.7 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 19.2 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 7.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 19.2 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15.7 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFHxS, EPA’s 2029 limit 10 ppt; highest 2.2 ppt

Highest sample, April 23, 2025; found in 5 of 14 · 2026 average: 0.56 ppt · Comes from the source

The highest sample was 2.2 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, its three samples averaged 0.56 ppt.

How it’s judged

No entry point has four quarters of results in a row to average, the way EPA’s limit is judged.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024, didn’t find it in any of 10.

What handles it

About PFHxS
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.8 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 2.8 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.0 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.2 ppb

Highest yearly average, 2021 to 2024 · 2024: not found · Comes from the source

Averaged by year, the highest was 0.2 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.0 ppb. In 2024, the latest year on file, it wasn’t found in any of its five samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.22 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
PFBS, Health benchmark 2,000 ppt; highest 4.2 ppt

Highest sample, Oct. 16, 2024; found in 8 of 14 · 2026 average: 2.3 ppt · Comes from the source

The highest sample was 4.2 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its three samples averaged 2.3 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2024, found it in 2 of 10, the highest 4.2 ppt.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)7.8 ppt highest, found in 27 of 41 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)12.3 ppt highest, found in 29 of 38 samples. Details
PFHxS10 pptBelow EPA’s limits2.2 ppt highest, found in 5 of 14 samples. Details
PFNA10 pptNot foundNot found in any of 14 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples
PFBSIndex onlyBelow EPA’s limits4.2 ppt highest, found in 8 of 14 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA4.3 ppt2 of 10None covers it
PFHxA3.7 ppt1 of 10None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Fluoride
  • Lead
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFNA

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Freeland Boro Muni Water Auth reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for the Groundwater Rule. It began May 1, 2019.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Groundwater RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)May 1, 2019 to May 31, 2019Resolved

Health-based violations only. 24 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Freeland Boro Muni Water Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 24 to Oct. 16, 2024; Pennsylvania’s results run from March 10, 2020 to Sept. 16, 2026; Pennsylvania’s PFAS results run from March 6, 2024 to July 8, 2026.

Testing your own tap

Freeland Boro Muni Water Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Freeland Boro Muni Water Auth’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Freeland Boro Muni Water Auth’s results flag: PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Freeland Boro Muni Water Auth serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Freeland Boro Muni Water Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • HawkMtn Labs Inc

    Hazle Township, PA · about 10 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (570) 455-6011

  • A E Kirby Memorial Health Center

    Wilkes-Barre, PA · about 15 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (570) 822-4278

  • Microbac Laboratories, Inc. - Pittston

    Pittston, PA · about 20 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (570) 348-0775

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA2400054. Rebuilt from EPA data on Oct. 25, 2026.