Dtma Main System
EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 15 were found.
Serves 8,655 people · Surface water bought from another system · Doylestown, PA
- Serves
- 8,655 people
- Connections
- 2,823
- Water source
- Surface water bought from another system
- Based in
- Doylestown, PA
- County
- Bucks
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 6, 2024 to Sept. 1, 2026, with EPA’s UCMR 5 samples, 2025, as the earlier record.
Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Jan. 23 to Oct. 21, 2025.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.6 ppm, for the period ending Dec. 31, 2010. None since is on file, so it is not counted as a current finding.
Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, arsenic, fluoride and chromium (total): Pennsylvania’s own results, samples taken from June 9, 2020 to Aug. 13, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFOS, PFOA, PFNA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 10.4 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 2 results
PFOS
Comes from the source
19.5 ppt
Highest sample, Feb. 6, 2024; found in 56 of 57
2026 average: 7.3 ppt
The highest sample was 19.5 ppt, about 4.9 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its 12 samples averaged 7.3 ppt.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 10.4 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and above EPA’s new limit of 4.0 ppt.
Earlier, EPA’s UCMR 5 samples
EPA’s UCMR 5 samples, 2025, found it in 14 of 18, the highest 13.4 ppt.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
PFOA
Comes from the source
17.9 ppt
Highest sample, Feb. 15, 2024; found in 57 of 57
2026 average: 9.8 ppt
The highest sample was 17.9 ppt, about 4.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. In 2026, the latest year on file, its 12 samples averaged 9.8 ppt.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 13.9 ppt, for the year to March 31, 2025: below Pennsylvania’s limit of 14 ppt and above EPA’s new limit of 4.0 ppt.
Earlier, EPA’s UCMR 5 samples
EPA’s UCMR 5 samples, 2025, found it in 14 of 18, the highest 14.2 ppt.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
15.1 ppb
Highest sample, July 15, 2025; found in 6 of 18
The highest sample was 15.1 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 8 results
Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFNA, EPA’s 2029 limit 10 ppt; highest 7.4 ppt
Highest sample, Jan. 23, 2025; found in 4 of 18 · Comes from the source
The highest sample was 7.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Nitrate, Legal limit 10 ppm; highest 4.3 ppm
Highest sample; found in 54 of 57 · 2026 average: 2.1 ppm · Comes from the source
The highest sample, in 2026, was 4.3 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its seven samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 5.8 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 21.3 ppb
Highest yearly average, 2020 to 2025 · Forms or is added in treatment
Averaged by year, the highest was 21.3 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 29 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 16 ppb, in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 13.1 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 8.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 13.1 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 17.5 ppb. In 2026, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 4.5 ppb, in 2016.
What handles it
No certification claim covers this compound yet.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 4.1 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 1.1 ppb · Comes from the source
Averaged by year, the highest was 4.1 ppb, in 2023, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 6.3 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 4.4 ppb, in 2017.
What handles it
- NSF/ANSI 58 look for “Uranium”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.7 ppb
Highest yearly average, 2021 to 2024 · Comes from the source
Averaged by year, the highest was 0.7 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.9 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 2.6 ppb, in 2012.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.037 ppm
Highest yearly average, 2021 to 2024 · Forms or is added in treatment
Averaged by year, the highest was 0.037 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.26 ppm. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.035 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
PFBS, Health benchmark 2,000 ppt; highest 9.8 ppt
Highest sample, July 15, 2025; found in 14 of 18 · Comes from the source
The highest sample was 9.8 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)17.9 ppt highest, found in 57 of 57 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)19.5 ppt highest, found in 56 of 57 samples. Details |
| PFHxS | 10 ppt | Not foundNot found in any of 18 samples, below 3 ppt |
| PFNA | 10 ppt | Below EPA’s limits7.4 ppt highest, found in 4 of 18 samples. Details |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 18 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits9.8 ppt highest, found in 14 of 18 samples. Details |
| Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 10.4 ppt | 14 of 18 | None covers it |
| PFHxA | 8.4 ppt | 14 of 18 | None covers it |
| PFHpA | 7.2 ppt | 11 of 18 | NSF/ANSI 53: Total PFAS Reduction |
| PFBA | 6.3 ppt | 3 of 18 | None covers it |
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Chromium (total)
- Lead
From EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpS
- PFHxS
- PFMBA
- PFMPA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction
For: PFOS, PFOA, Arsenic
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)
Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction
For: PFOS, PFOA, Uranium, Arsenic
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOS, PFOA
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOS, PFOA
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOS, PFOA
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOS, PFOA
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOS, PFOA
Every filter for these, those that cover both first
Disinfectant
Dtma Main System reported disinfecting with chlorine, not chloramine, at all 8 of its sampling points, in its 2025 sampling for EPA. It also reported ozone.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 18 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, arsenic, fluoride and chromium (total) results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Dtma Main System’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 23 to Oct. 21, 2025; Pennsylvania’s results run from June 9, 2020 to Aug. 13, 2026; Pennsylvania’s PFAS results run from Feb. 6, 2024 to Sept. 1, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Dtma Main System’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Dtma Main System’s results flag: PFOS, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Pennsylvania certifies closest to the area Dtma Main System serves, or a kit by mail
The 3 labs Pennsylvania certifies closest to the area Dtma Main System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Eurofins Philadelphia - Horsham
Horsham, PA · about 8 miles
Certified for bacteria
Analytical Laboratories, Inc
Telford, PA · about 13 miles
Certified for bacteria, nitrate
Pace Analytical Services, LLC - Ewing
Ewing, NJ · about 16 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 3 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own reportDtma Main System must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, PFAS results read Oct. 17, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Pennsylvania Department of Environmental Protection, Drinking Water Reporting System, results from Jan. 2, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Pennsylvania DEP Laboratory Accreditation Program, accredited labs for drinking water, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID PA1090128. Rebuilt from EPA data on Oct. 25, 2026.