Skip to content
TapBuff

City of Lock Haven Water Dept

EPA’s and Pennsylvania’s records have results for 34 contaminants in its water; 2 were found.

Serves 8,450 people · Surface water · Lock Haven, PA

Serves
8,450 people
Connections
3,200
Water source
Surface water
Based in
Lock Haven, PA
County
Clinton
Owner
Local government
The 2 ZIP codes it serves

17745, 17748

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 17 to Oct. 17, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride: Pennsylvania’s own results, samples taken from Feb. 13, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 43.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 37.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 43.6 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 67.4 ppb. In 2026, the latest year on file, its 17 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 52.4 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 29.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 26.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 29.2 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 42.2 ppb. In 2026, the latest year on file, its 18 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 35.4 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Pennsylvania utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for the Revised Total Coliform Rule. It began Oct. 16, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR)Oct. 16, 2016Resolved

Health-based violations only. 29 monitoring or reporting violations not shown.

Disinfectant

City of Lock Haven Water Dept reported adding no disinfectant at its one sampling point, in its 2024 sampling for EPA.

What that means

Most utilities add chlorine or chloramine. CDC says some that draw groundwater don’t need a disinfectant, because testing shows the water doesn’t carry enough germs to make people sick. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Lock Haven Water Dept’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 17 to Oct. 17, 2024; Pennsylvania’s results run from Feb. 13, 2020 to Aug. 5, 2026.

Testing your own tap

City of Lock Haven Water Dept’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Lock Haven Water Dept’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area City of Lock Haven Water Dept serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area City of Lock Haven Water Dept serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services LLC - Williamsport, PA

    Williamsport, PA · about 30 miles

    (570) 326-4001

  • Agricultural Analytical Services Laboratory

    University Park, PA · about 37 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (814) 863-0841

  • SPL - State College

    State College, PA · about 38 miles

    Certified for bacteria

    (610) 375-8378

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA4180048. Rebuilt from EPA data on Oct. 25, 2026.