Skip to content
TapBuff

Brookville Municipal Auth

EPA’s and Pennsylvania’s records have results for 38 contaminants in its water; 10 were found.

Serves 6,220 people · Surface water · Brookville, PA

Serves
6,220 people
Connections
2,842
Water source
Surface water
Based in
Brookville, PA
County
Jefferson
Owner
Local government
The ZIP code it serves

15825

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for PFOS and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Jan. 31, 2024 to April 8, 2026, with EPA’s UCMR 5 samples, 2023 to 2024, as the earlier record.

Lithium, and PFAS Pennsylvania didn’t test: EPA UCMR 5, samples taken from Jan. 24, 2023 to Jan. 10, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium: Pennsylvania’s own results, samples taken from Jan. 8, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFHxS, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFBA at 11 ppt: see it below.

Below EPA’s limits, 9 results

PFOS and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 13.1 ppb

Highest sample, Jan. 24, 2023; found in 1 of 4 · Comes from the source

The highest sample was 13.1 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 66.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 21.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 66.6 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 97.1 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 62.9 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFHxS, EPA’s 2029 limit 10 ppt; highest 8.0 ppt

Highest sample, April 1, 2026; found in 1 of 6 · 2026 average: 4.0 ppt · Comes from the source

The highest sample was 8.0 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029. In 2026, the latest year on file, its two samples averaged 4.0 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way EPA’s limit is judged, the highest was 0 ppt, for the year to Sept. 30, 2025: below EPA’s new limit of 10 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, didn’t find it in any of 4.

What handles it

About PFHxS
PFOS, EPA’s 2029 limit 4.0 ppt · health goal zero; highest 2.1 ppt

Highest sample, April 1, 2026; found in 1 of 9 · 2026 average: 1.1 ppt · Comes from the source

The highest sample was 2.1 ppt, below EPA’s new limit of 4.0 ppt, which takes effect in 2029. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, its two samples averaged 1.1 ppt.

How it’s judged

Averaged over four quarters at one entry point, the way both Pennsylvania’s limit and EPA’s are judged, the highest was 0 ppt, for the year to Dec. 31, 2024: below Pennsylvania’s limit of 18 ppt and below EPA’s new limit of 4.0 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, didn’t find it in any of 4.

What handles it

About PFOS
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 20 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 20 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 41.5 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 28 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.63 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.62 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.63 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.68 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.39 ppm, in 2017.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.1 ppb

90th percentile, 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest 0.38 ppm

Highest sample; found in 4 of 9 · 2026 average: 0.32 ppm · Comes from the source

The highest sample, in 2026, was 0.38 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.56 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFBS, Health benchmark 2,000 ppt; highest 6.1 ppt

Highest sample, April 1, 2026; found in 1 of 6 · 2026 average: 3.1 ppt · Comes from the source

The highest sample was 6.1 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own. In 2026, the latest year on file, its two samples averaged 3.1 ppt.

Earlier, EPA’s UCMR 5 samples

EPA’s UCMR 5 samples, 2023 to 2024, didn’t find it in any of 4.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 9 samples
PFOS4.0 pptBelow EPA’s limits2.1 ppt highest, found in 1 of 9 samples. Details
PFHxS10 pptBelow EPA’s limits8.0 ppt highest, found in 1 of 6 samples. Details
PFNA10 pptNot foundNot found in any of 6 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 6 samples
PFBSIndex onlyBelow EPA’s limits6.1 ppt highest, found in 1 of 6 samples. Details
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged, and what EPA’s UCMR 5 samples found before. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.
Pennsylvania utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA11 ppt1 of 4None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFNA
  • PFOA

From EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 7 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, Lead Reduction

    For: PFOS, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Brookville Municipal Auth reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 to 2024 sampling for EPA. It also reported permanganate and ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic, chromium (total) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Brookville Municipal Auth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 24, 2023 to Jan. 10, 2024; Pennsylvania’s results run from Jan. 8, 2020 to July 15, 2026; Pennsylvania’s PFAS results run from Jan. 31, 2024 to April 8, 2026.

Testing your own tap

Brookville Municipal Auth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Brookville Municipal Auth’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 2.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Pennsylvania certifies closest to the area Brookville Municipal Auth serves, or a kit by mail

The 3 labs Pennsylvania certifies closest to the area Brookville Municipal Auth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • G & C Coal Analysis Lab Inc

    Summerville, PA · about 10 miles

    (814) 849-7301

  • Pace Analytical Services, LLC - Dubois

    Dubois, PA · about 16 miles

    Certified for bacteria, nitrate

    (814) 371-6030

  • White Oak Laboratory LLC

    Ridgway, PA · about 20 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (814) 772-5927

All 108 certified labs for Pennsylvania⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Pennsylvania certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Pennsylvania’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID PA6330004. Rebuilt from EPA data on Oct. 25, 2026.