TapBuff

Wayne Water Districts water quality report, rewritten

Serves
39,403
Connections
16,149
Water source
Groundwater
Based in
Goldsboro, NC
County
Wayne
Owner
Local government
The 10 ZIP codes it serves

27530, 27533, 27534, 27830, 27863, 28333, 28365, 28551, 28578, 28678

PWSID NC0496065 · EPA data

Read this first

Nothing in the federal data for this utility is above a health goal. That covers PFAS, lithium, lead and copper; it does not cover everything, so read what this report cannot tell you below.

5 health-based violations since 2016. Details are below.

What was found

Highlighted: above the health goal, or EPA’s health benchmark where there is no goal. Circled: above the legal limit in at least one sample, or the action level. Every scale puts that line at its middle.

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

CompoundHighest sampleFound inCertification claim
PFBA9.2 ppt2 of 10None covers it

Tested and not found

Below EPA’s minimum reporting level in every sample taken from May 28, 2025 to Nov. 13, 2025. Not found means not measured above that level, which is not the same as zero.

All 30 compounds tested and not found
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lead
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024—Resolved
Benzo(a)pyreneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2020 to March 31, 20200.0003 MG/LResolved
Benzo(a)pyreneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 20190.0003 MG/LResolved
Benzo(a)pyreneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2019 to Sept. 30, 20190.0003 MG/LResolved
Benzo(a)pyreneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2019 to June 30, 20190.0003 MG/LResolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 14 monitoring or reporting violations not shown.

What this report cannot tell you

  • Levels of everything else. Federal bulk data carries results for PFAS, lithium, lead and copper, and violations for the rest. Nitrate, arsenic, disinfection byproducts and other levels are in Wayne Water Districts’s own annual report, which it must send you every year.
  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
  • Anything after the latest data. SDWIS data is from 2026 Q2; UCMR 5 samples are from May 28, 2025 to Nov. 13, 2025.

What to do next

  • Nothing here is above a health goal

    In the federal data for this utility. That data does not cover everything, which is why the next step matters.

    Every contaminant TapBuff tracks
  • Get the utility’s own report

    Wayne Water Districts must send you a water quality report every year. It lists nitrate, arsenic and byproduct levels this page cannot.

    How to read it
  • Test your own tap for lead

    Your service line, solder and fixtures decide the lead at your faucet, not the utility’s average.

    Lead in your water: what to do
  • Decide if you want a filter at all

    A filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.

    NSF/ANSI standards, decoded