Skip to content
TapBuff

Town of Clarkton

EPA’s and CDC’s records have results for 38 contaminants in its water; 3 were found.

Serves 1,233 people · Groundwater · Clarkton, NC

Serves
1,233 people
Connections
493
Water source
Groundwater
Based in
Clarkton, NC
County
Bladen
Owner
Local government
The ZIP code it serves

28433

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 23 to Sept. 24, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate and uranium: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 25, 2014 to Feb. 21, 2017. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 42.2 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 36.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 42.2 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 49 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 12 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 6.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 12 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 13 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.22 ppm

Highest yearly average, 2014 to 2017 · 2017 average: 0.21 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.22 ppm, in 2014, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.48 ppm. In 2017, the latest year on file, its three samples averaged below the limit.

What handles it

About fluoride
North Carolina utilities above EPA’s PFAS limits⁠
35 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 10 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Town of Clarkton reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate and uranium results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Town of Clarkton’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 23 to Sept. 24, 2024; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Feb. 25, 2014 to Feb. 21, 2017.

Testing your own tap

Town of Clarkton’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Town of Clarkton’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs North Carolina certifies closest to the area Town of Clarkton serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Town of Clarkton serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • TBL

    Lumberton, NC · about 20 miles

    Certified for bacteria

    (910) 370-0371

  • Microbac - Fayetteville Division

    Fayetteville, NC · about 36 miles

    Certified for bacteria, minerals and other inorganics

    (910) 864-1920

  • Brunswick County Health Department

    Bolivia, NC · about 40 miles

    Certified for bacteria

    (910) 253-2261

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NC0309020. Rebuilt from EPA data on Oct. 25, 2026.