Skip to content
TapBuff

Diamond Head S/D

EPA’s and CDC’s records have results for 38 contaminants in its water; 10 were found.

Serves 1,433 people · Groundwater · Mooresville, NC

Serves
1,433 people
Connections
564
Water source
Groundwater
Based in
Mooresville, NC
County
Iredell
Owner
Private
The ZIP code it serves

28117

The short answer

None of the results here is above a limit in force today. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 6 to Dec. 13, 2023.

Uranium, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM) and arsenic: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 16, 2012 to Dec. 4, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFHxA at 3.8 ppt: see them below.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.6 ppt

Highest sample, June 6, 2023; found in 1 of 12

The highest sample was 4.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.3 ppt, below it.

What handles it

Below EPA’s limits, 7 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.5 ppt

Highest sample, Dec. 13, 2023; found in 2 of 12 · Comes from the source

The highest sample was 5.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 5.8 ppb

Highest yearly average, 2020 · Comes from the source

Averaged by year, the highest was 5.8 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.0 ppb, in 2019.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.35 ppm

Highest yearly average, 2012 to 2018 · 2018 average: 0.3 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.35 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.89 ppm. In 2018, the latest year on file, its four samples averaged below the limit.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest yearly average 0.43 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 0.23 ppm · Comes from the source

Averaged by year, the highest was 0.43 ppm, in 2021, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.3 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.1 ppb

Highest yearly average, 2020 to 2023 · 2023: not found · Forms or is added in treatment

Averaged by year, the highest was 2.1 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it wasn’t found.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 2.2 ppb

Highest yearly average, 2020 to 2023 · Forms or is added in treatment

Averaged by year, the highest was 2.2 ppb, in 2023, below EPA’s legal limit of 80 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFBS, Health benchmark 2,000 ppt; highest 5.8 ppt

Highest sample, June 6, 2023; found in 2 of 12 · Comes from the source

The highest sample was 5.8 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.6 ppt highest, found in 1 of 12 samples. Details
PFOS4.0 pptNot foundNot found in any of 12 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits5.5 ppt highest, found in 2 of 12 samples. Details
PFNA10 pptNot foundNot found in any of 12 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 12 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits5.8 ppt highest, found in 2 of 12 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.52 at its highest sampling location, Wells 1 and 2
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
North Carolina utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA3.8 ppt2 of 12None covers it
PFPeA3.6 ppt1 of 12None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claim: PFOA Reduction

    For: PFOA

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Uranium

    For: PFOA, Uranium

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

Disinfectant

Diamond Head S/D reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Uranium, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM) and arsenic results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Diamond Head S/D’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 6 to Dec. 13, 2023; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Feb. 16, 2012 to Dec. 4, 2018.

Testing your own tap

Diamond Head S/D’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Diamond Head S/D’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Diamond Head S/D’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs North Carolina certifies closest to the area Diamond Head S/D serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Diamond Head S/D serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services- Huntersville NC

    Huntersville, NC · about 11 miles

    Certified for bacteria, organic chemicals, disinfection byproducts

    (803) 227-2702

  • Statesville Analytical, Holdings, LLC

    Statesville, NC · about 12 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (704) 872-4697

  • Lincoln County Health Department

    Lincolnton, NC · about 21 miles

    Certified for bacteria

    (704) 736-8636

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NC0149182. Rebuilt from EPA data on Oct. 25, 2026.