Skip to content
TapBuff

Davidson Water Inc

EPA’s and CDC’s records have results for 38 contaminants in its water; 4 were found.

Serves 154,307 people · Surface water · Lexington, NC

Serves
154,307 people
Connections
69,163
Water source
Surface water
Based in
Lexington, NC
County
Davidson
Owner
Private
The 17 ZIP codes it serves

27012, 27107, 27127, 27205, 27239, 27260, 27262, 27263, 27265, 27284, 27292, 27295, 27299, 27351, 27360, 27370, 27374

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 17 to Oct. 2, 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and uranium: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 15, 2012 to May 8, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 52.6 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 35.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 52.6 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 47.2 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 26.3 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 22.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 26.3 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 40.2 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.1 ppm

Highest yearly average, 2012 to 2019 · 2019: not found · Forms or is added in treatment

Averaged by year, the highest was 1.1 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest yearly average 1.1 ppm

Highest yearly average, 2020 to 2023 · 2023: not found · Comes from the source

Averaged by year, the highest was 1.1 ppm, in 2020, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it wasn’t found.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
North Carolina utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Davidson Water Inc reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA. It also reported chlorine dioxide.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, arsenic and uranium results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Davidson Water Inc’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 17 to Oct. 2, 2023; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Aug. 15, 2012 to May 8, 2019.

Testing your own tap

Davidson Water Inc’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Davidson Water Inc’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs North Carolina certifies closest to the area Davidson Water Inc serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Davidson Water Inc serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Dentisafe, Inc.

    Jamestown, NC · about 13 miles

    Certified for bacteria

    (336) 688-1400

  • Scientific Analytical Institute

    Greensboro, NC · about 16 miles

    Certified for bacteria, lead and copper, metals, minerals and other inorganics, asbestos

    (336) 292-3888

  • EMSL Analytical, Inc.-Kernersville

    Kernersville, NC · about 16 miles

    Certified for asbestos

    (336) 992-1025

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NC0229025. Rebuilt from EPA data on Oct. 25, 2026.