Skip to content
TapBuff

Chinquapin Water Association

EPA’s and CDC’s records have results for 38 contaminants in its water; 3 were found.

Serves 4,686 people · Groundwater · Chinquapin, NC

Serves
4,686 people
Connections
2,148
Water source
Groundwater
Based in
Chinquapin, NC
County
Duplin
Owner
Private
The 3 ZIP codes it serves

28466, 28518, 28521

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 10 to Dec. 9, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate and uranium: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 28, 2012 to Jan. 15, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 33.9 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 31.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 33.9 ppb, in 2021, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 16 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 15.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 16 ppb, in 2022, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.43 ppm

Highest yearly average, 2012 to 2019 · Forms or is added in treatment

Averaged by year, the highest was 0.43 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.86 ppm. That was also the latest year on file.

What handles it

About fluoride
North Carolina utilities above EPA’s PFAS limits⁠
35 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Disinfectant

Chinquapin Water Association reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, nitrate and uranium results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Chinquapin Water Association’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 10 to Dec. 9, 2024; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Feb. 28, 2012 to Jan. 15, 2019.

Testing your own tap

Chinquapin Water Association’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Chinquapin Water Association’s latest lead sampling in EPA’s records, 2026 to 2028, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs North Carolina certifies closest to the area Chinquapin Water Association serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Chinquapin Water Association serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Beacham Laboratory- Division of Environmental

    Jacksonville, NC · about 17 miles

    Certified for bacteria

    (910) 392-0223

  • Cape Fear Analytical, LLC

    Wilmington, NC · about 39 miles

    Certified for organic chemicals

    (910) 795-0421

  • Environmental Chemists, Inc.

    Wilmington, NC · about 39 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (910) 392-0223

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NC0431050. Rebuilt from EPA data on Oct. 25, 2026.