Skip to content
TapBuff

Cherokee Water System

EPA’s records have results for 36 contaminants in its water; 2 were found.

Serves 16,203 people · Surface water · Cherokee, NC

Serves
16,203 people
Connections
2,637
Water source
Surface water
Based in
Cherokee, NC
Owner
Native American
The 2 ZIP codes it serves

28719, 28789

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 5 health-based violations since 2016, 4 with no fix on record in EPA’s file.

Filters for uranium, if you want it lower⁠The 5 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 10, 2023 to Jan. 8, 2024.

Nitrate, uranium, arsenic, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from Jan. 10, 2012 to Aug. 8, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 2 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 0.37 ppm

Highest sample; found in 12 of 12 · 2019 average: 0.2 ppm · Comes from the source

The highest sample, in 2016, was 0.37 ppm, below EPA’s legal limit of 10 ppm. In 2019, the latest year on file, its three samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.92 ppb

Highest yearly average, 2012 to 2017 · Comes from the source

Averaged by year, the highest was 0.92 ppb, in 2017, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.2 ppb. That was also the latest year on file.

What handles it

About uranium
North Carolina utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

5 health-based violations since 2016, 1 for the Lead and Copper Rule Revisions, 1 for tetrachloroethylene, 1 for carbon tetrachloride, 1 for trichloroethylene and 1 for vinyl chloride. The latest began Nov. 15, 2024, and 4 have no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryNov. 15, 2024Resolved
TetrachloroethyleneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to Dec. 31, 2023, 0.024 MG/LNo fix on recordEPA: archived
Carbon tetrachlorideThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to Dec. 31, 2023, 0.025 MG/LNo fix on recordEPA: archived
TrichloroethyleneThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to Dec. 31, 2023, 0.025 MG/LNo fix on recordEPA: archived
Vinyl chlorideThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2023 to Dec. 31, 2023, 0.23 MG/LNo fix on recordEPA: archived

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Every filter certified for it⁠

Disinfectant

Cherokee Water System reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 to 2024 sampling for EPA. It also reported ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Newer results, and everything else. Nitrate, arsenic, fluoride, chromium, uranium and disinfection byproduct results here come from EPA’s national compliance file, which ends in 2019. Cherokee Water System’s own annual report, which it must send you every year, has newer results and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 10, 2023 to Jan. 8, 2024; EPA’s compliance samples are from Jan. 10, 2012 to Aug. 8, 2019.

Testing your own tap

Cherokee Water System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cherokee Water System’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs North Carolina certifies closest to the area Cherokee Water System serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Cherokee Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Environmental, Inc.-Sylva

    Sylva, NC · about 10 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (828) 586-5588

  • Jackson County Health Dept.

    Sylva, NC · about 10 miles

    Certified for bacteria

    (828) 587-8247

  • EAS Testing Laboratory

    Franklin, NC · about 20 miles

    Certified for bacteria

    (828) 524-2353

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID 043740039. Rebuilt from EPA data on Oct. 25, 2026.