Skip to content
TapBuff

Carolina Trace Water System

EPA’s and CDC’s records have results for 33 contaminants in its water; 10 were found.

Serves 4,516 people · Surface water bought from another system · Sanford, NC

Serves
4,516 people
Connections
1,778
Water source
Surface water bought from another system
Based in
Sanford, NC
County
Lee
Owner
Private
The 2 ZIP codes it serves

27330, 27332

The short answer

EPA recorded violations of the legal limit for total trihalomethanes (TTHM) here in 2022 and 2026. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. 2 health-based violations since 2016, 1 with no fix on record in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 2 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 11 to Nov. 10, 2025.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 11.5 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2026)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

77.1 ppb

Highest yearly average, 2020 to 2023

2023 average: 52.9 ppb

Averaged by year, the highest was 77.1 ppb, in 2022, below EPA’s legal limit of 80 ppb. In 2023, the latest year on file, it averaged below the limit. EPA recorded violations for total trihalomethanes (TTHM) at this utility in 2022 and 2026.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 72.2 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

14 ppt

Highest sample, Aug. 13, 2025; found in 4 of 4

The highest sample was 14 ppt, about 3.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 12.3 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

9.7 ppt

Highest sample, Feb. 11, 2025; found in 4 of 4

The highest sample was 9.7 ppt, about 2.4 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.8 ppt, also above it.

What handles it

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 31.4 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 27.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 31.4 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 35.3 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.0 ppt

Highest sample, Feb. 11, 2025; found in 2 of 4 · Comes from the source

The highest sample was 4.0 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
PFBS, Health benchmark 2,000 ppt; highest 5.2 ppt

Highest sample, Nov. 10, 2025; found in 3 of 4 · Comes from the source

The highest sample was 5.2 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)9.7 ppt highest, found in 4 of 4 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)14 ppt highest, found in 4 of 4 samples. Details
PFHxS10 pptBelow EPA’s limits4.0 ppt highest, found in 2 of 4 samples. Details
PFNA10 pptNot foundNot found in any of 4 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits5.2 ppt highest, found in 3 of 4 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.19 at its highest sampling location, CAROLINA TRACE WATER SYSTEM
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
North Carolina utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA11.5 ppt4 of 4None covers it
PFHxA10 ppt4 of 4None covers it
PFBA7.2 ppt3 of 4None covers it
PFHpA4.8 ppt2 of 4NSF/ANSI 53: Total PFAS Reduction
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

2 health-based violations since 2016, all for TTHM. The latest began July 1, 2026, and 1 has no fix on record in EPA’s file.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2026 to Sept. 30, 2026, 81 ppbNo fix on recordEPA: addressed
July 1, 2022 to Sept. 30, 2022, 82 ppbResolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, PFOS Reduction, PFOA Reduction

    For: Total trihalomethanes (TTHM), PFOS, PFOA

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA)

    For: Total trihalomethanes (TTHM), PFOS, PFOA

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

Disinfectant

Carolina Trace Water System reported adding no disinfectant at its one sampling point, in its 2025 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Carolina Trace Water System’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 11 to Nov. 10, 2025; CDC’s yearly averages for North Carolina cover 2020 to 2023.

Testing your own tap

Carolina Trace Water System’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Carolina Trace Water System’s latest lead sampling in EPA’s records, 2026 to 2028, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Carolina Trace Water System’s results flag: total trihalomethanes (TTHM), PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs North Carolina certifies closest to the area Carolina Trace Water System serves, or a kit by mail

The 3 labs North Carolina certifies closest to the area Carolina Trace Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Cameron Testing Services Inc.

    Sanford, NC · about 5 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (919) 208-4240

  • Eurofins Built Env. Testing East - Cary

    Cary, NC · about 30 miles

    Certified for asbestos

    (919) 481-1413

  • Eurofins Raleigh

    Cary, NC · about 30 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (919) 467-3090

All 112 certified labs for North Carolina⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that North Carolina certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against North Carolina’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NC0353101. Rebuilt from EPA data on Oct. 25, 2026.