Amherst DPW Water Division
EPA’s and Massachusetts’s records have results for 37 contaminants in its water; 5 were found.
Serves 39,263 people · Surface water · Amherst, MA · Hardness: varies by source
- Serves
- 39,263 people
- Connections
- 6,437
- Water source
- Surface water
- Based in
- Amherst, MA
- County
- Hampshire
- Owner
- Local government
- Hardness
- Varies by source
The short answer
Fluoride averaged above its legal limit’s level in 2026, with no violation recorded. Nitrate is above the health goal. 1 health-based violation since 2016, resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Aug. 14, 2023 to June 12, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2011 to 2025.
Fluoride, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and chromium (total): Massachusetts’s own results, samples taken from Jan. 7, 2020 to July 24, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above the limit’s level, no violation recorded, 1 result
Fluoride
Forms or is added in treatment
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A filter certified for it, at the tap you drink from, reduces it.
6.8 ppm
Highest yearly average, 2020 to 2026
Averaged by year, the highest was 6.8 ppm, in 2026, above EPA’s legal limit of 4.0 ppm. That was also the latest year on file. EPA recorded no violation for fluoride at this utility since 2020.
How it’s judged
EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.94 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Above the health goal, 1 result
Nitrate
Comes from the source
21 ppm
Highest sample; found in 42 of 60
2026 average: 2.3 ppm
In 2026, two samples were above EPA’s legal limit of 10 ppm, the highest 21 ppm. Two have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. That was also the latest year on file, and its 19 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 3.3 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Below EPA’s limits, 3 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 8.0 ppb
90th percentile, 2025 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 8.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 31.1 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 20.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 31.1 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 109 ppb. In 2026, the latest year on file, its seven samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 52.9 ppb, in 2014, and EPA recorded a violation in 2014.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 32.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 26.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 32.5 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 83.8 ppb. In 2026, the latest year on file, its seven samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 49.4 ppb, in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Fluoride, Nitrate/Nitrite (30 ppm challenge), Lead Reduction
For: Fluoride, Nitrate, Lead
- NSF/ANSI 58
Claims: Fluoride Reduction, Nitrate/Nitrite Reduction, Lead Reduction
For: Fluoride, Nitrate, Lead
Other claims that cover it: Nitrate
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Fluoride, Nitrate; also lead, found below its limits
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Fluoride, Nitrate; also lead, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: Fluoride, Nitrate; also lead, found below its limits
2 more filters
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Fluoride; also lead, found below its limits
Under-sink reverse osmosis
Five years: $1,149, household of 3, cartridges included
Certified for: Fluoride; also lead, found below its limits
Every filter for these, those that cover both first
The best water filters for fluoride, ranked
Hardness
Soft to moderately hard depending on the source, 6.9 to 88 mg/L (0.4 to 5.1 grains per gallon), across 6 sampling points, 2020 to 2023.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Amherst DPW Water Division reported chloramine at 1 of its 5 sampling points and chlorine without chloramine at 1, and no disinfectant at 3, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
1 health-based violation since 2016 for the Surface Water Treatment Rule. It began Sept. 1, 2024.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Surface Water Treatment Rule | Required treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR) | Sept. 1, 2024 to Sept. 30, 2024 | Resolved |
Health-based violations only.
What this report can’t tell you
Everything else. Fluoride, nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and chromium (total) results here are Massachusetts’s own from 2020 on, with EPA’s national file for 2012 to 2019. Amherst DPW Water Division’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Aug. 14, 2023 to June 12, 2024; Massachusetts’s results run from Jan. 7, 2020 to July 24, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Amherst DPW Water Division’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 8.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Amherst DPW Water Division’s results flag: fluoride and nitrate. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Massachusetts certifies closest to the area Amherst DPW Water Division serves, or a kit by mail
The 3 labs Massachusetts certifies closest to the area Amherst DPW Water Division serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Quabbin Analytical Laboratory
Belchertown, MA · about 8 miles
Certified for bacteria
Howard Laboratories LLC
South Deerfield, MA · about 9 miles
Certified for bacteria
Pace Analytical LLC-East Longmeadow
East Longmeadow, MA · about 22 miles
Certified for bacteria, nitrate, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Massachusetts certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Massachusetts’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with fluoride
- Get the utility’s own reportAmherst DPW Water Division must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Massachusetts Department of Environmental Protection, Drinking Water Program, results from Jan. 2, 2020 to Oct. 5, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: MassDEP Online Searchable Laboratory Certification Listing, potable water, read Oct. 16, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Massachusetts Department of Environmental Protection, Drinking Water Program, results from June 15, 2020 to Aug. 18, 2023, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MA1008000. Rebuilt from EPA data on Oct. 25, 2026.