Skip to content
TapBuff

Washington Suburban Sanitary Commission

EPA’s and Maryland’s records have results for 37 contaminants in its water; 7 were found.

Serves 1.9 million people · Surface water · Laurel, MD · Hardness: varies by source

Serves
1.9 million people
Connections
438,639
Water source
Surface water
Based in
Laurel, MD
County
Montgomery
Owner
Local government
Hardness
Varies by source
The 60 ZIP codes it serves

20601, 20607, 20613, 20623, 20705, 20706, 20707, 20708, 20710, 20712, 20715, 20716, 20720, 20721, 20722, 20723, 20735, 20737, 20738, 20740, 20742, 20743, 20744, 20745, 20746, 20747, 20748, 20762, 20769, 20770, 20771, 20772, 20773, 20774, 20777, 20781, 20782, 20783, 20784, 20785, 20787, 20790, 20812, 20814, 20815, 20816, 20817, 20818, 20830, 20832, 20833, 20837, 20841, 20850, 20851, 20852, 20853, 20854, 20855, 20857

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 27, 2023 to June 10, 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, chromium (total) and arsenic: Maryland’s own results, samples taken from Jan. 7, 2020 to Sept. 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. Two other PFAS with no federal limit were found, the highest PFPeA at 6.7 ppt: see them below.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 46.4 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 46.4 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 94.9 ppb. That was also the latest year on file. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 57.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 57.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 57.6 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 112 ppb. In 2026, the latest year on file, its 386 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 56.1 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 2.4 ppm

Highest sample; found in 158 of 160 · 2026 average: 0.93 ppm · Comes from the source

The highest sample, in 2026, was 2.4 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its 18 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.8 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.71 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.55 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.71 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2026, the latest year on file, its 18 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.68 ppm, in 2015.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 0.22 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 0.22 ppb, in 2026, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.0 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.21 ppb, in 2013.

What handles it

About chromium (total)
Maryland utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA6.7 ppt4 of 8None covers it
PFHxA4.8 ppt4 of 8None covers it
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Moderately hard to hard depending on the source, 70 to 154 mg/L (4.1 to 9 grains per gallon), in its 2025 tap water analysis.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Washington Suburban Sanitary Commission reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, chromium (total) and arsenic results here are Maryland’s own from 2020 on, with EPA’s national file for 2012 to 2019. Washington Suburban Sanitary Commission’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 27, 2023 to June 10, 2024; Maryland’s results run from Jan. 7, 2020 to Sept. 15, 2026.

Testing your own tap

Washington Suburban Sanitary Commission’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Maryland certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Washington Suburban Sanitary Commission’s latest lead sampling in EPA’s records, 2018 to 2020, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Maryland certifies closest to the area Washington Suburban Sanitary Commission serves, or a kit by mail

The 3 labs Maryland certifies closest to the area Washington Suburban Sanitary Commission serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AMA Analytical Services, Inc.

    Lanham, MD · about 6 miles

    Certified for lead and copper, asbestos

    (301) 450-3346

  • EMSL Analytical, Inc. - Beltsville

    Beltsville, MD · about 7 miles

    Certified for bacteria

    (301) 937-5700

  • Washington Suburban Sanitary Commission Laboratory Division (WSSC)

    Silver Spring, MD · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (301) 206-7575

All 92 certified labs for Maryland⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Maryland certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Maryland’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MD0150005. Rebuilt from EPA data on Oct. 25, 2026.