Skip to content
TapBuff

Kentucky - American Water Co

EPA’s and Kentucky’s records have results for 38 contaminants in its water; 11 were found.

Serves 669,042 people · Surface water · Lexington, KY · Hardness: hard

Serves
669,042 people
Connections
134,973
Water source
Surface water
Based in
Lexington, KY
County
Fayette
Owner
Private
Hardness
Hard
The 36 ZIP codes it serves

40324, 40347, 40355, 40356, 40357, 40359, 40361, 40362, 40370, 40379, 40383, 40391, 40502, 40503, 40504, 40505, 40506, 40507, 40508, 40509, 40510, 40511, 40513, 40514, 40515, 40516, 40517, 40526, 41010, 41031, 41035, 41046, 41052, 41083, 41086, 41098

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for arsenic, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 6 to Dec. 5, 2023.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, nitrate, chromium (total) and uranium: Kentucky’s own results, samples taken from Jan. 6, 2020 to Aug. 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Four other PFAS with no federal limit were found, the highest 6:2 FTS at 11.1 ppt: see them below.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

15 ppb

Highest sample, Dec. 4, 2023; found in 1 of 16

The highest sample was 15 ppb, above EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 36.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 27.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 36.3 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 65.8 ppb. In 2026, the latest year on file, its 36 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 40.5 ppb, in 2012, and EPA recorded a violation in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 47.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 36 ppb · Forms or is added in treatment

Averaged by year, the highest was 47.7 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 121 ppb. In 2026, the latest year on file, its 36 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 54.3 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.84 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.81 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.84 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.99 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.98 ppm, in 2015.

What handles it

About fluoride
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.3 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 1.3 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.0 ppb. In 2026, the latest year on file, it wasn’t found in any of its three samples.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 0.75 ppm

Highest sample; found in 19 of 19 · 2026, one sample: 0.59 ppm · Comes from the source

The highest sample, in 2022, was 0.75 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.88 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFBS, Health benchmark 2,000 ppt; highest 3.6 ppt

Highest sample, Dec. 4, 2023; found in 2 of 16 · Comes from the source

The highest sample was 3.6 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 16 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 16 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 16 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 16 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 16 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.6 ppt highest, found in 2 of 16 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Kentucky utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
6:2 FTS11.1 ppt2 of 16None covers it
PFBA5.2 ppt1 of 16None covers it
PFPeA5.2 ppt3 of 16None covers it
PFHxA3.7 ppt1 of 16None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Hard, typically 136 mg/L (8 grains per gallon), across 3 sampling points, 2015 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Kentucky - American Water Co reported chloramine at 3 of its 5 sampling points and chlorine without chloramine at 2, in its 2023 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported permanganate.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, nitrate, chromium (total) and uranium results here are Kentucky’s own from 2020 on, with EPA’s national file for 2012 to 2019. Kentucky - American Water Co’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 6 to Dec. 5, 2023; Kentucky’s results run from Jan. 6, 2020 to Aug. 3, 2026.

Testing your own tap

Kentucky - American Water Co’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Kentucky certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kentucky - American Water Co’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Kentucky - American Water Co’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
Labs Kentucky certifies, or a kit by mail

TapBuff hasn’t read Kentucky’s list of certified labs yet. The national page links every state’s own list.

Certified labs, state by state⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Kentucky certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Kentucky’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID KY0340250. Rebuilt from EPA data on Oct. 25, 2026.