Skip to content
TapBuff

Iowa - American WTR Co - Davenport

EPA’s and Iowa’s records have results for 37 contaminants in its water; 7 were found.

Serves 147,720 people · Surface water · Davenport, IA · Hardness: very hard

Serves
147,720 people
Connections
57,222
Water source
Surface water
Based in
Davenport, IA
County
Scott
Owner
Private
Hardness
Very hard
The 12 ZIP codes it serves

52722, 52726, 52732, 52753, 52767, 52801, 52802, 52803, 52804, 52805, 52806, 52807

The short answer

None of the results here is above a limit in force today. PFOA is above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 6 to Nov. 6, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2006 to 2024.

Haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM), fluoride, arsenic and chromium (total): Iowa’s own results, samples taken from Jan. 21, 2020 to July 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFBA at 14.8 ppt: see it below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOA

Comes from the source

Above EPA’s new limit (2029)

4.1 ppt

Highest sample, Nov. 6, 2023; found in 1 of 3

The highest sample was 4.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. No sampling location here has the full set of samples EPA averages to compare with the limit.

What handles it

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 29 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 20.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 29 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 48 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 31.1 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 4.5 ppm

Highest sample; found in 13 of 13 · 2026, one sample: 4.4 ppm · Comes from the source

The highest sample, in 2025, was 4.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.7 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 34.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 29.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 34.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 54.7 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 46.9 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.66 ppm

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.66 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.65 ppm, in 2016.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)4.1 ppt highest, found in 1 of 3 samples. Details
PFOS4.0 pptNot foundNot found in any of 3 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 3 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 3 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 3 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 3 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Not worked outNo sampling location has a full set of samples to work it out
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Utilities above EPA’s PFAS limits, state by state⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA14.8 ppt3 of 3None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, Lead Reduction

    For: PFOA, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, 239 mg/L (14 grains per gallon), at its one sampling point, 2016 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Iowa - American WTR Co - Davenport reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM), fluoride, arsenic and chromium (total) results here are Iowa’s own from 2020 on, with EPA’s national file for 2012 to 2019. Iowa - American WTR Co - Davenport’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 6 to Nov. 6, 2023; Iowa’s results run from Jan. 21, 2020 to July 8, 2026.

Testing your own tap

Iowa - American WTR Co - Davenport’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Iowa certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Iowa - American WTR Co - Davenport’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Iowa - American WTR Co - Davenport’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Iowa certifies closest to the area Iowa - American WTR Co - Davenport serves, or a kit by mail

The 3 labs Iowa certifies closest to the area Iowa - American WTR Co - Davenport serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Quad Cities Metallurgical Laboratory

    Davenport, IA · about 5 miles

    Certified for bacteria, nitrate

    (563) 386-7827

  • QC Analytical Services

    Le Claire, IA · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (563) 289-3373

  • Ion Environmental Solutions

    Muscatine, IA · about 29 miles

    Certified for bacteria, nitrate

    (563) 299-2214

All 36 certified labs for Iowa⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Iowa certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Iowa’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IA8222001. Rebuilt from EPA data on Oct. 25, 2026.