Skip to content
TapBuff

Citizens Water - Indianapolis

EPA’s and Indiana’s records have results for 38 contaminants in its water; 12 were found.

Serves 880,345 people · Surface water · Indianapolis, IN · Hardness: very hard

Serves
880,345 people
Connections
352,138
Water source
Surface water
Based in
Indianapolis, IN
County
Marion
Owner
Local government
Hardness
Very hard
The 60 ZIP codes it serves

46032, 46037, 46038, 46040, 46055, 46062, 46077, 46107, 46112, 46113, 46118, 46122, 46123, 46126, 46130, 46140, 46142, 46143, 46149, 46158, 46163, 46167, 46168, 46183, 46201, 46202, 46203, 46204, 46205, 46206, 46208, 46214, 46216, 46217, 46218, 46219, 46220, 46221, 46222, 46224, 46225, 46226, 46227, 46228, 46229, 46231, 46234, 46235, 46236, 46237, 46239, 46240, 46241, 46249, 46250, 46251, 46254, 46256, 46259, 46260

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, uranium and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Aug. 22, 2023 to Aug. 23, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2026.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic: Indiana’s own results, samples taken from Feb. 1, 2020 to Sept. 30, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from May 10, 2016 to June 20, 2016. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Three other PFAS with no federal limit were found, the highest PFPeA at 7.6 ppt: see them below.

Below EPA’s limits, 9 results

Lead, uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 56.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 46.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 56.1 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 90.1 ppb. In 2026, the latest year on file, its 144 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 54.7 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 41.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 29.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 41.8 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 69.9 ppb. In 2026, the latest year on file, its 144 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48.2 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 4.0 ppm

Highest sample; found in 60 of 103 · 2026 average: 0.49 ppm · Comes from the source

The highest sample, in 2025, was 4.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 10 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.4 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 3.4 ppb

90th percentile, 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 3.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.5 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.72 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.0 ppm. In 2026, the latest year on file, its 372 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.86 ppm, in 2012.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 0.81 ppb

Highest yearly average, 2016 · Comes from the source

Averaged by year, the highest was 0.81 ppb, in 2016, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.4 ppb. That is the only year on file.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 1.3 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 1.3 ppb, in 2024, below EPA’s legal limit of 100 ppb. Its highest single sample was 2.9 ppb. In 2026, the latest year on file, it wasn’t found in any of its 10 samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.4 ppb, in 2018.

What handles it

About chromium (total)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.089 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.089 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.6 ppb. In 2026, the latest year on file, it wasn’t found in any of its 10 samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.37 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
PFBS, Health benchmark 2,000 ppt; highest 4.0 ppt

Highest sample, Aug. 30, 2023; found in 3 of 26 · Comes from the source

The highest sample was 4.0 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 26 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 26 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 26 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 26 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 26 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.0 ppt highest, found in 3 of 26 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Indiana utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA7.6 ppt11 of 26None covers it
PFBA5.7 ppt2 of 26None covers it
PFHxA5.1 ppt9 of 26None covers it
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard on average, 317 mg/L (18.5 grains per gallon), ranging from 148 to 460 mg/L, in its 2025 water quality report.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Citizens Water - Indianapolis reported adding chloramine before water enters its pipes, at all 9 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, chromium (total) and arsenic results here are Indiana’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Citizens Water - Indianapolis’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Aug. 22, 2023 to Aug. 23, 2024; Indiana’s results run from Feb. 1, 2020 to Sept. 30, 2026; EPA’s compliance samples are from May 10 to June 20, 2016.

Testing your own tap

Citizens Water - Indianapolis’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Indiana certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Citizens Water - Indianapolis’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 3.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Indiana certifies closest to the area Citizens Water - Indianapolis serves, or a kit by mail

The 3 labs Indiana certifies closest to the area Citizens Water - Indianapolis serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 81 certified labs for Indiana⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Indiana certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Indiana’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IN5249004. Rebuilt from EPA data on Oct. 25, 2026.