Skip to content
TapBuff

Rockford

EPA’s and Illinois’s records have results for 37 contaminants in its water; 8 were found.

Serves 147,051 people · Groundwater · Rockford, IL · Hardness: very hard

Serves
147,051 people
Connections
51,060
Water source
Groundwater
Based in
Rockford, IL
County
Winnebago
Owner
Local government
Hardness
Very hard
The 10 ZIP codes it serves

61016, 61101, 61102, 61103, 61104, 61107, 61108, 61109, 61112, 61114

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead and arsenic, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 9, 2023 to Oct. 15, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2026.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.5 ppm, for the period ending Dec. 31, 1992. None since is on file, so it is not counted as a current finding.

Nitrate, fluoride, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5) and chromium (total): Illinois’s own results, samples taken from Jan. 6, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFPeA at 4.4 ppt: see it below.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Below EPA’s limits, 7 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Lead, Action level 15 ppb · health goal zero; 90th percentile 10 ppb

90th percentile, 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 10 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

About lead
PFHxS, EPA’s 2029 limit 10 ppt; highest 6.6 ppt

Highest sample, April 10, 2024; found in 2 of 44 · Comes from the source

The highest sample was 6.6 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Nitrate, Legal limit 10 ppm; highest 3.5 ppm

Highest sample; found in 69 of 165 · 2026 average: 0.41 ppm · Comes from the source

The highest sample, in 2020, was 3.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 17 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.4 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.85 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.7 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.85 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. In 2026, the latest year on file, its 19 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2015.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 11.1 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 11.1 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 20.2 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.3 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 1.0 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.24 ppb · Comes from the source

Averaged by year, the highest was 1.0 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.2 ppb. In 2026, the latest year on file, its 19 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.7 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.0 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 3.0 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 7.4 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 18.2 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 44 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 44 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits6.6 ppt highest, found in 2 of 44 samples. Details
PFNA10 pptNot foundNot found in any of 44 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 44 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 44 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Illinois utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA4.4 ppt1 of 44None covers it
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 12 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard, typically 313 mg/L (18.3 grains per gallon), across 26 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Rockford reported disinfecting with chlorine, not chloramine, at all 23 of its sampling points, in its 2023 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5) and chromium (total) results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Rockford’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 9, 2023 to Oct. 15, 2025; Illinois’s results run from Jan. 6, 2020 to Aug. 5, 2026.

Testing your own tap

Rockford’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Illinois certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Rockford’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 10 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Illinois certifies closest to the area Rockford serves, or a kit by mail

The 3 labs Illinois certifies closest to the area Rockford serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • McHenry County Health Department

    Woodstock, IL · about 30 miles

    Certified for bacteria

    (815) 334-4585

  • Pace Analytical Services, LLC - McHenry

    McHenry, IL · about 39 miles

    Certified for bacteria

    (815) 344-4044

  • Suburban Laboratories, Inc.

    Geneva, IL · about 45 miles

    Certified for bacteria

    (708) 544-3260

All 30 certified labs for Illinois⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IL2010300. Rebuilt from EPA data on Oct. 25, 2026.