Pike County PWD 1
EPA’s and Illinois’s records have results for 37 contaminants in its water; 5 were found.
Serves 5,375 people · Groundwater · Pittsfield, IL · Hardness: very hard
- Serves
- 5,375 people
- Connections
- 2,065
- Water source
- Groundwater
- Based in
- Pittsfield, IL
- County
- Pike
- Owner
- Local government
- Hardness
- Very hard
The short answer
None of the results here is above a limit in force today. Nitrate is above the health goal. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from May 7 to Nov. 5, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2025.
Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic and chromium (total): Illinois’s own results, samples taken from Jan. 8, 2020 to Oct. 7, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above the health goal, 1 result
Nitrate
Comes from the source
12 ppm
Highest sample; found in 97 of 97
2026 average: 4.0 ppm
One sample, in 2020, was above EPA’s legal limit of 10 ppm, at 12 ppm. No follow-up sample at that point within 30 days is on file. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 11 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Below EPA’s limits, 4 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 29.6 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 1.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 29.6 ppb, in 2023, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 11 ppb, in 2017.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Lead, Action level 15 ppb · health goal zero; 90th percentile 4.4 ppb
90th percentile, 2023 to 2025 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 4.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.7 ppm
Highest yearly average, 2021 to 2024 · 2024 average: 0.57 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.7 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.74 ppm. In 2024, the latest year on file, its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.7 ppb
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 1.7 ppb, in 2023, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 2.9 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Nitrate/Nitrite (30 ppm challenge), Lead Reduction
For: Nitrate, Lead
- NSF/ANSI 58
Claims: Nitrate/Nitrite Reduction, Lead Reduction
For: Nitrate, Lead
Other claims that cover it: Nitrate
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Nitrate; also lead, found below its limits
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Nitrate; also lead, found below its limits
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: Nitrate; also lead, found below its limits
2 more filters
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for lead only, found below its limits
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for lead only, found below its limits
Every filter certified for it
Hardness
Very hard, typically 245 mg/L (14.3 grains per gallon), across 2 sampling points, 2018 to 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Pike County PWD 1 reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic and chromium (total) results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Pike County PWD 1’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 7 to Nov. 5, 2024; Illinois’s results run from Jan. 8, 2020 to Oct. 7, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Pike County PWD 1’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 4.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Pike County PWD 1’s results flag: nitrate. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The lab Illinois certifies closest to the area Pike County PWD 1 serves, or a kit by mail
The lab Illinois certifies closest to the area Pike County PWD 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Pace Analytical Services, LLC - Hazelwood
Hazelwood, MO · about 63 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on nitrateWhat it does to health, where it comes from, and the certification claim that addresses it.About nitrate
- Get the utility’s own reportPike County PWD 1 must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Illinois Environmental Protection Agency, Bureau of Water, results from Jan. 2, 2020 to Oct. 13, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Illinois Department of Public Health, certified water microbiology laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Illinois Environmental Protection Agency, Bureau of Water, results from Jan. 31, 2018 to Feb. 6, 2024, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID IL1495000. Rebuilt from EPA data on Oct. 25, 2026.