Oglesby
EPA’s and Illinois’s records have results for 38 contaminants in its water; 6 were found.
Serves 4,500 people · Groundwater · Oglesby, IL · Hardness: moderately hard
- Serves
- 4,500 people
- Connections
- 1,747
- Water source
- Groundwater
- Based in
- Oglesby, IL
- County
- Lasalle
- Owner
- Local government
- Hardness
- Moderately hard
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 12 to Oct. 25, 2023.
Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 1.4 ppm, for the period ending Sept. 30, 1992. None since is on file, so it is not counted as a current finding.
Fluoride, total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5), nitrate, arsenic and uranium: Illinois’s own results, samples taken from Jan. 27, 2020 to July 29, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
110 ppb
Highest sample, April 12, 2023; found in 2 of 2
The highest sample was 110 ppb, about 11 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.1 ppm
Highest yearly average, 2020 to 2026 · 2026, one sample: 0.94 ppm · Forms or is added in treatment
Averaged by year, the highest was 1.1 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 16.4 ppb
Highest yearly average, 2020 to 2026 · 2026, one sample: 2.5 ppb · Forms or is added in treatment
Averaged by year, the highest was 16.4 ppb, in 2025, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 22.1 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Chromium (total), Legal limit 100 ppb; highest yearly average 6.5 ppb
Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source
Averaged by year, the highest was 6.5 ppb, in 2020, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 11 ppb, in 2017.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.4 ppb
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 3.4 ppb, in 2025, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 4.2 ppb, in 2017.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.39 ppm
Highest sample; found in 5 of 7 · 2026: not found · Comes from the source
The highest sample, in 2020, was 0.39 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.3 ppm, in 2019.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Lead
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Hardness
Moderately hard, typically 105 mg/L (6.1 grains per gallon), across 2 sampling points, 2017 to 2023.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Oglesby reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Fluoride, total trihalomethanes (TTHM), chromium (total), haloacetic acids (HAA5), nitrate, arsenic and uranium results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Oglesby’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 12 to Oct. 25, 2023; Illinois’s results run from Jan. 27, 2020 to July 29, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Oglesby’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Oglesby’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Illinois certifies closest to the area Oglesby serves, or a kit by mail
The 3 labs Illinois certifies closest to the area Oglesby serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Test, Inc.
Peru, IL · about 6 miles
Certified for bacteria
Daily Laboratories
Peoria, IL · about 51 miles
Certified for bacteria
Pace Analytical Services, LLC - Peoria
Peoria, IL · about 51 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportOglesby must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Illinois Environmental Protection Agency, Bureau of Water, results from Jan. 2, 2020 to Oct. 13, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Illinois Department of Public Health, certified water microbiology laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Illinois Environmental Protection Agency, Bureau of Water, results from Jan. 26, 2017 to March 16, 2023, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID IL0990700. Rebuilt from EPA data on Oct. 25, 2026.
Towns it serves
Also in LaSalle County
- IL American - Streator19,000
- Ottawa18,097
- La Salle9,700
- Mendota7,100
- Marseilles5,061
- IL American - Lake Holiday4,750