Skip to content
TapBuff

Mitchell PWD

EPA’s and Illinois’s records have results for 33 contaminants in its water; 6 were found.

Serves 5,253 people · Surface water bought from another system · Granite City, IL · Hardness: very hard

Serves
5,253 people
Connections
2,101
Water source
Surface water bought from another system
Based in
Granite City, IL
County
Madison
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

62025, 62040

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 9 to Oct. 18, 2023.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Illinois’s own results, samples taken from Feb. 13, 2020 to Aug. 13, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Three other PFAS with no federal limit were found, the highest PFBA at 17 ppt: see them below.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 47.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 37.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 47.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 77.3 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 45.8 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 24.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 19.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 24.8 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 34.9 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 28.6 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 21 ppt

Highest sample, Jan. 9, 2023; found in 1 of 4 · Comes from the source

The highest sample was 21 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 4 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 4 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits21 ppt highest, found in 1 of 4 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Illinois utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA17 ppt4 of 4None covers it
PFPeA4.5 ppt3 of 4None covers it
PFHxA4.3 ppt2 of 4None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Very hard, 232 mg/L (13.6 grains per gallon), at its one sampling point, in 2020.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Mitchell PWD reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 sampling for EPA. It also reported ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mitchell PWD’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 9 to Oct. 18, 2023; Illinois’s results run from Feb. 13, 2020 to Aug. 13, 2026.

Testing your own tap

Mitchell PWD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Illinois certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Mitchell PWD’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Illinois certifies closest to the area Mitchell PWD serves, or a kit by mail

The 3 labs Illinois certifies closest to the area Mitchell PWD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Teklab, Inc.

    Collinsville, IL · about 7 miles

    Certified for bacteria

    (618) 344-1004

  • Pace Analytical Services, LLC - Hazelwood

    Hazelwood, MO · about 19 miles

    Certified for bacteria

    (314) 432-0550

  • Precision Water Lab

    Centralia, IL · about 51 miles

    Certified for bacteria

    (618) 533-0758

All 30 certified labs for Illinois⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IL1195210. Rebuilt from EPA data on Oct. 25, 2026.