Skip to content
TapBuff

Highwood

EPA’s and Illinois’s records have results for 37 contaminants in its water; 5 were found.

Serves 5,335 people · Surface water · Highwood, IL · Hardness: hard

Serves
5,335 people
Connections
1,257
Water source
Surface water
Based in
Highwood, IL
County
Lake
Owner
Local government
Hardness
Hard
The ZIP code it serves

60040

The short answer

Lead is above the action level in the latest monitoring period, ending Dec. 31, 2024. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 4 to Nov. 4, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total): Illinois’s own results, samples taken from Jan. 6, 2020 to Aug. 25, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the legal limit, 1 result

Lead

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s health goal for lead is zero: it can harm health even at low exposure. A utility over the action level must now tell its customers within 24 hours. Meanwhile, use only cold water for drinking, cooking and formula, run the tap after water has sat, and a filter certified for lead, at the tap you drink from, reduces it.

76 ppb

90th percentile, 2022 to 2024

In the latest period, 9 in 10 homes sampled were at or below 76 ppb, above EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027, and this result is at or above that. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits, 4 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 54.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 44.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 54.9 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 57 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 54.4 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 34.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 22.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 34.9 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 39.4 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 33 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.7 ppm

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.7 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.9 ppm, in 2013.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.47 ppm

Highest sample; found in 7 of 7 · 2026, one sample: 0.36 ppm · Comes from the source

The highest sample, in 2020, was 0.47 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.62 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Illinois utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Hardness

Hard, typically 135 mg/L (7.9 grains per gallon), across 3 sampling points, 2017 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Highwood reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total) results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Highwood’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 4 to Nov. 4, 2025; Illinois’s results run from Jan. 6, 2020 to Aug. 25, 2026.

Testing your own tap

Highwood’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Illinois certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Highwood’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 76 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Illinois certifies closest to the area Highwood serves, or a kit by mail

The 3 labs Illinois certifies closest to the area Highwood serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Lake County Environmental Laboratory

    Libertyville, IL · about 9 miles

    Certified for bacteria

    (847) 377-8017

  • Culligan Analytical Laboratory

    Rosemont, IL · about 16 miles

    Certified for bacteria

    (847) 430-1284

  • Pace Analytical Services, LLC - McHenry

    McHenry, IL · about 26 miles

    Certified for bacteria

    (815) 344-4044

All 30 certified labs for Illinois⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IL0970550. Rebuilt from EPA data on Oct. 25, 2026.