Gurnee
EPA’s and Illinois’s records have results for 38 contaminants in its water; 4 were found.
Serves 30,193 people · Surface water bought from another system · Gurnee, IL · Hardness: hard
- Serves
- 30,193 people
- Connections
- 9,864
- Water source
- Surface water bought from another system
- Based in
- Gurnee, IL
- County
- Lake
- Owner
- Local government
- Hardness
- Hard
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 9, 2024 to Jan. 7, 2025.
Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), uranium, arsenic, chromium (total) and nitrate: Illinois’s own results, samples taken from Feb. 18, 2020 to Aug. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 4 results
Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 24 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 21.5 ppb · Forms or is added in treatment
Averaged by year, the highest was 24 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 43.6 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 27.5 ppb, in 2017.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.76 ppm
Highest yearly average, 2021 to 2024 · 2024 average: 0.74 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.76 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.83 ppm. In 2024, the latest year on file, its two samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 7.6 ppb · Forms or is added in treatment
Averaged by year, the highest was 8.8 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 15.4 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 8.1 ppb, in 2017.
What handles it
No certification claim covers this compound yet.
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.3 ppb
Highest yearly average, 2024 · Comes from the source
Averaged by year, the highest was 1.3 ppb, in 2024, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.8 ppb. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
- Nitrate
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 5 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsHardness
Hard, 152 mg/L (8.9 grains per gallon), at its one sampling point, in 2020.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Gurnee reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 to 2025 sampling for EPA. It also reported ozone, permanganate and ultraviolet light.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), uranium, arsenic, chromium (total) and nitrate results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Gurnee’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 9, 2024 to Jan. 7, 2025; Illinois’s results run from Feb. 18, 2020 to Aug. 5, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Gurnee’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Illinois certifies closest to the area Gurnee serves, or a kit by mail
The 3 labs Illinois certifies closest to the area Gurnee serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Lake County Environmental Laboratory
Libertyville, IL · about 5 miles
Certified for bacteria
Pace Analytical Services, LLC - McHenry
McHenry, IL · about 18 miles
Certified for bacteria
McHenry County Health Department
Woodstock, IL · about 27 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Nothing here is above an EPA limit or health benchmarkIn EPA’s and Illinois’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportGurnee must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Illinois Environmental Protection Agency, Bureau of Water, results from Jan. 2, 2020 to Oct. 13, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Illinois Department of Public Health, certified water microbiology laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Illinois Environmental Protection Agency, Bureau of Water, results from Feb. 26 to 26, 2020, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID IL0970350. Rebuilt from EPA data on Oct. 25, 2026.