Skip to content
TapBuff

Forsyth

EPA’s and Illinois’s records have results for 38 contaminants in its water; 6 were found.

Serves 3,490 people · Groundwater · Forsyth, IL · Hardness: moderately hard

Serves
3,490 people
Connections
1,609
Water source
Groundwater
Based in
Forsyth, IL
County
Macon
Owner
Local government
Hardness
Moderately hard
The ZIP code it serves

62535

The short answer

Copper is above the action level in the latest monitoring period, ending Dec. 31, 2021. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 20 to Sept. 12, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2000 to 2021.

Arsenic, fluoride, haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate and chromium (total): Illinois’s own results, samples taken from Aug. 4, 2020 to Aug. 27, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the legal limit, 1 result

Copper

Comes from pipes, often your own

Above the action level

What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.

1.6 ppm

90th percentile, 2021

In the latest period, 9 in 10 homes sampled were at or below 1.6 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.7 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 3.7 ppb, in 2026, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.8 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.57 ppm

Highest yearly average, 2021 to 2024 · 2024, one sample: 0.33 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.57 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. In 2024, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2015.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.6 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 4.6 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.8 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 3.5 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 1.9 ppb · Forms or is added in treatment

Averaged by year, the highest was 3.5 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.2 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.25 ppm

Highest sample; found in 3 of 8 · 2026: not found · Comes from the source

The highest sample, in 2023, was 0.25 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Illinois utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Copper Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Copper, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Copper Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Copper, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Moderately hard, 79 mg/L (4.6 grains per gallon), at its one sampling point, 2018 to 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Forsyth reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 sampling for EPA. It also reported permanganate.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for the Lead and Copper Rule. It began Jan. 1, 2021.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Lead and Copper RuleWater chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-ComplianceJan. 1, 2021 to June 30, 2021Resolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Arsenic, fluoride, haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate and chromium (total) results here are Illinois’s own from 2020 on, with EPA’s national file for 2012 to 2019. Forsyth’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 20 to Sept. 12, 2023; Illinois’s results run from Aug. 4, 2020 to Aug. 27, 2026.

Testing your own tap

Forsyth’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Illinois certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Forsyth’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Illinois certifies closest to the area Forsyth serves, or a kit by mail

The 3 labs Illinois certifies closest to the area Forsyth serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Key Laboratory Services, Inc.

    Monticello, IL · about 22 miles

    Certified for bacteria

    (217) 875-2691

  • Daily Laboratories

    Peoria, IL · about 68 miles

    Certified for bacteria

    (309) 691-4513

  • Pace Analytical Services, LLC - Peoria

    Peoria, IL · about 68 miles

    Certified for bacteria

    (309) 683-1766

All 30 certified labs for Illinois⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Illinois certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Illinois’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID IL1150200. Rebuilt from EPA data on Oct. 25, 2026.