Skip to content
TapBuff

Newark Water Department

EPA’s and Delaware’s records have results for 37 contaminants in its water; 14 were found.

Serves 40,000 people · Surface water · Newark, DE · Hardness: varies by source

Serves
40,000 people
Connections
10,000
Water source
Surface water
Based in
Newark, DE
County
New Castle
Owner
Local government
Hardness
Varies by source
The 4 ZIP codes it serves

19711, 19713, 19716, 19717

The short answer

Total trihalomethanes (TTHM) averaged above its legal limit’s level in 2026, with no violation recorded. PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 14 to Dec. 6, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2005 to 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.1 ppm, for the period ending Jan. 10, 1994. None since is on file, so it is not counted as a current finding.

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and fluoride: Delaware’s own results, samples taken from Jan. 15, 2020 to Aug. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total) and arsenic: EPA’s compliance monitoring file, samples taken from Sept. 24, 2013 to Dec. 30, 2015. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA, PFOS, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFHxA at 13.2 ppt: see them below.

Above the limit’s level, no violation recorded, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Above the limit’s level, no violation

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A filter certified for it, at the tap you drink from, reduces it.

87.6 ppb

Highest yearly average, 2021 to 2026

Averaged by year, the highest was 87.6 ppb, in 2026, above EPA’s legal limit of 80 ppb. Its highest single sample was 116 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

How it’s judged

EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43.5 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOA

Comes from the source

Above EPA’s new limit (2029)

25.3 ppt

Highest sample, July 7, 2023; found in 5 of 6

The highest sample was 25.3 ppt, about 6.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 22.6 ppt, also above it.

What handles it

PFOS

Comes from the source

Above EPA’s new limit (2029)

7.5 ppt

Highest sample, July 7, 2023; found in 2 of 6

The highest sample was 7.5 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.4 ppt, also above it.

What handles it

Below EPA’s limits, 7 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 7.7 ppm

Highest sample; found in 149 of 152 · 2026 average: 3.4 ppm · Comes from the source

The highest sample, in 2021, was 7.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 18 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 7.1 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.5 ppt

Highest sample, July 7, 2023; found in 2 of 6 · Comes from the source

The highest sample was 5.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 27.2 ppb

Highest yearly average, 2021 to 2026 · 2026 average: 10.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 27.2 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 67.2 ppb. In 2026, the latest year on file, its four samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 22.6 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.36 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.35 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.36 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.81 ppm. In 2026, the latest year on file, its 18 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.91 ppm, in 2013.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.0 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 2.8 ppb

Highest yearly average, 2013 to 2015 · 2015 average: 2.1 ppb · Comes from the source

Averaged by year, the highest was 2.8 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.6 ppb. In 2015, the latest year on file, its two samples averaged below the limit.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 6.6 ppt

Highest sample, July 7, 2023; found in 2 of 6 · Comes from the source

The highest sample was 6.6 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)25.3 ppt highest, found in 5 of 6 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)7.5 ppt highest, found in 2 of 6 samples. Details
PFHxS10 pptBelow EPA’s limits5.5 ppt highest, found in 2 of 6 samples. Details
PFNA10 pptNot foundNot found in any of 6 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 6 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits6.6 ppt highest, found in 2 of 6 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.51 at its highest sampling location, South Well Field Treatment Plant
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Delaware utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA13.2 ppt6 of 6None covers it
PFPeA12.6 ppt5 of 6None covers it
PFBA11.2 ppt2 of 6None covers it
PFHpA7.9 ppt2 of 6NSF/ANSI 53: Total PFAS Reduction
23 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, PFOA Reduction, PFOS Reduction, Lead Reduction

    For: Total trihalomethanes (TTHM), PFOA, PFOS, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: Total trihalomethanes (TTHM), PFOA, PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Soft to moderately hard depending on the source, 42 to 71 mg/L (2.5 to 4.1 grains per gallon), across 2 sampling points, 2024 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Newark Water Department reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5) and fluoride results here are Delaware’s own from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) and arsenic come from EPA’s file alone, which ends in 2019. Newark Water Department’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 14 to Dec. 6, 2023; Delaware’s results run from Jan. 15, 2020 to Aug. 24, 2026; EPA’s compliance samples are from Sept. 24, 2013 to Dec. 30, 2015.

Testing your own tap

Newark Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Delaware certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Newark Water Department’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Newark Water Department’s results flag: total trihalomethanes (TTHM), PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Delaware certifies closest to the area Newark Water Department serves, or a kit by mail

The 3 labs Delaware certifies closest to the area Newark Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 13 certified labs for Delaware⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Delaware certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Delaware’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID DE0000630. Rebuilt from EPA data on Oct. 25, 2026.