Skip to content
TapBuff

Security Water District

EPA’s and Colorado’s records have results for 38 contaminants in its water; 11 were found.

Serves 20,000 people · Surface water bought from another system · Colorado Springs, CO · Hardness: very hard

Serves
20,000 people
Connections
7,519
Water source
Surface water bought from another system
Based in
Colorado Springs, CO
County
El Paso
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

80817, 80911

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for uranium and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from July 16, 2024 to April 9, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2021 to 2026.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride, chromium (total) and arsenic: Colorado’s own results, samples taken from March 3, 2020 to Oct. 5, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. Three other PFAS with no federal limit were found, the highest PFPeA at 63.6 ppt: see them below.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

33.3 ppb

Highest sample, July 16, 2024; found in 8 of 10

The highest sample was 33.3 ppb, about 3.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Uranium and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 6.8 ppm

Highest sample; found in 22 of 25 · 2026 average: 5.3 ppm · Comes from the source

The highest sample, in 2024, was 6.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 42.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 14.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 42.6 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 68.5 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 51.7 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 18.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 18.4 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 44.5 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 34.5 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 6.2 ppb

Highest yearly average, 2021 to 2026 · Comes from the source

Averaged by year, the highest was 6.2 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That was also the latest year on file.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm

Highest yearly average, 2022 to 2026 · 2026, one sample: 0.51 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.72 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.9 ppb

90th percentile, 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.9 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 3.0 ppb

Highest yearly average, 2021 to 2026 · Comes from the source

Averaged by year, the highest was 3.0 ppb, in 2026, below EPA’s legal limit of 100 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Colorado utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA63.6 ppt5 of 10None covers it
PFBA35.4 ppt4 of 10None covers it
PFHxA6.7 ppt1 of 10None covers it
27 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, 272 mg/L (15.9 grains per gallon), at its one sampling point, 2023 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Security Water District reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), uranium, fluoride, chromium (total) and arsenic results here are Colorado’s own from 2020 on, with EPA’s national file for 2012 to 2019. Security Water District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from July 16, 2024 to April 9, 2025; Colorado’s results run from March 3, 2020 to Oct. 5, 2026.

Testing your own tap

Security Water District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Colorado certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Security Water District’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 1.9 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Security Water District’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Colorado certifies closest to the area Security Water District serves, or a kit by mail

The 3 labs Colorado certifies closest to the area Security Water District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • El Paso County Health Department

    Colorado Springs, CO · about 14 miles

    Certified for bacteria, nitrate, minerals and other inorganics

  • Pueblo Department of Public Health and Environment

    Pueblo, CO · about 29 miles

    Certified for bacteria

  • Colorado Department of Health & Environment

    Denver, CO · about 71 miles

    Certified for bacteria

All 54 certified labs for Colorado⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Colorado certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Colorado’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CO0121775. Rebuilt from EPA data on Oct. 25, 2026.