Skip to content
TapBuff

Denver Cascade MHP

What EPA’s and Colorado’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,200 people
Connections
382
Water source
Surface water bought from another system
Based in
Wheat Ridge, CO
County
Adams
Owner
Private
Hardness
Hard
The ZIP code it serves

80260

The short answer

Nothing in EPA’s and Colorado’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016.

What was found

Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride: Colorado’s own results, samples taken from Feb. 14, 2020 to Aug. 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

Below EPA’s limits3

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

41.6ppb

Highest yearly average, 2020 to 2026

2026 average: 27.7 ppb

Averaged by year, the highest was 41.6 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 57.1 ppb. In 2026, the latest year on file, its three samples averaged 27.7 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 32.7 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

15.5ppb

Highest yearly average, 2020 to 2026

2026 average: 14.2 ppb

Averaged by year, the highest was 15.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 19.4 ppb. In 2026, the latest year on file, its three samples averaged 14.2 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 16.4 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.56ppm

Highest yearly average, 2025

Averaged by year, the highest was 0.56 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Lead

Hardness

Hard, typically 140 mg/L (8.2 grains per gallon), across 2 sampling points, in 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Groundwater RuleA significant problem found in a state inspection was not fixed on time.EPA: Failure To Address DeficiencyJuly 25, 2019—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 5 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride results here are Colorado’s own from 2020 on, with EPA’s national file for 2012 to 2019. Denver Cascade MHP’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Colorado’s results run from Feb. 14, 2020 to Aug. 19, 2026.

Testing your own tap

Denver Cascade MHP’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Colorado certifies.

The 3 labs Colorado certifies closest to the area Denver Cascade MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Murray-Brown Laboratories, LLC.

    Northglenn, CO · about 4 miles

    Certified for bacteria

  • Colorado Analytical Laboratory - Commerce City

    Commerce City, CO · about 7 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

  • Eurofins Denver

    Arvada, CO · about 7 miles

    Certified for nitrate, minerals and other inorganics, organic chemicals, PFAS

All 54 certified labs for Colorado

Sources

PWSID CO0101205. Rebuilt from EPA data on Oct. 18, 2026.