Skip to content
TapBuff

Yucaipa Valley Water District

EPA’s and California’s records have results for 38 contaminants in its water; 11 were found.

Serves 52,202 people · Surface water · Yucaipa, CA · Hardness: varies by source

Serves
52,202 people
Connections
13,656
Water source
Surface water
Based in
Yucaipa, CA
County
San Bernardino
Owner
Local government
Hardness
Varies by source
The 2 ZIP codes it serves

92320, 92399

The short answer

EPA recorded a violation of the legal limit for nitrate here in 2023. In 2026, the latest year on file, it averaged 2.4 ppm, below the limit. EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2024. In 2026, the latest year on file, it averaged 15.5 ppb, below the limit. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 5 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 5 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 10, 2023 to July 9, 2024.

Lead and copper: copper at 30 mg/L (1998) and copper at 234 mg/L (1994) are left out of this report: more than 20 times the action level, they look like µg/L entered as mg/L.

Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride, uranium and chromium (total): California’s own results, samples taken from March 24, 2020 to June 17, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 8.9 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 2 results

Nitrate

Comes from the source

Violation on record (2023)

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. A violation like this calls for a notice to customers within 24 hours. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

12 ppm

Highest sample; found in 578 of 697

2026 average: 2.4 ppm

From 2021 to 2023, two samples were above EPA’s legal limit of 10 ppm, the highest 12 ppm in 2023. One came back under the limit on the next sample at the same point and one has no follow-up sample on file within 30 days. In 2026, the latest year on file, its 93 samples averaged below the limit. EPA recorded a violation for nitrate at this utility in 2023.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11 ppm, in 2019, and EPA recorded a violation in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2024)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

42.9 ppb

Highest yearly average, 2020 to 2026

2026 average: 15.5 ppb

Averaged by year, the highest was 42.9 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 115 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2024.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 65.8 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.2 ppt

Highest sample, Oct. 10, 2023; found in 1 of 31

The highest sample was 4.2 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.1 ppt, below it.

What handles it

Below EPA’s limits, 6 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.0 ppb

Highest yearly average, 2020 to 2025 · Comes from the source

Averaged by year, the highest was 2.0 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 7.9 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 9.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 9.2 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 18.6 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 18.3 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.48 ppm

Highest yearly average, 2020 to 2025 · 2025 average: 0.36 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.48 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.78 ppm. In 2025, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.61 ppm, in 2013.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 2.2 ppb

Highest yearly average, 2020 to 2023 · 2023 average: 1.7 ppb · Comes from the source

Averaged by year, the highest was 2.2 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.3 ppb. In 2023, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.8 ppb, in 2014.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 0.83 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 0.83 ppb, in 2023, below EPA’s legal limit of 100 ppb. Its highest single sample was 10 ppb. In 2025, the latest year on file, it wasn’t found in any of its four samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.48 ppb, in 2012.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 10 ppt

Highest sample, April 24, 2024; found in 2 of 31 · Comes from the source

The highest sample was 10 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.2 ppt highest, found in 1 of 31 samples. Details
PFOS4.0 pptNot foundNot found in any of 31 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 31 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 31 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 31 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits10 ppt highest, found in 2 of 31 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA8.9 ppt5 of 31None covers it
PFHxA7.1 ppt2 of 31None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Trihalomethanes (TTHM) Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Total trihalomethanes (TTHM), PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Trihalomethanes (TTHM) Reduction, Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Nitrate, Total trihalomethanes (TTHM), PFOA, Arsenic, Uranium

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

Hardness

Moderately hard to very hard depending on the source, 95 to 310 mg/L (5.6 to 18.1 grains per gallon), across 20 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Yucaipa Valley Water District reported chlorine, not chloramine, at 3 of its 16 sampling points, and no disinfectant at 13, in its 2023 to 2024 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

5 health-based violations since 2016, 3 for nitrate, 1 for the Long Term 2 Enhanced Surface Water Treatment Rule and 1 for TTHM. The latest began March 17, 2026.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Long Term 2 Enhanced Surface Water Treatment RuleWater drawn from a river, lake or reservoir was not filtered as required.EPA: Failure to Filter (SWTR)March 17, 2026Resolved
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2024 to Sept. 30, 2024, 81.8 ppbResolved
NitrateA sample was above the legal limit, for a contaminant judged one sample at a time.EPA: Maximum Contaminant Level Violation, Single SampleApril 1, 2023 to June 30, 2023, 12 ppmResolved
July 1, 2019 to Sept. 30, 2019, 11 ppmResolved
NitrateThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2019 to Sept. 30, 2019, 11 ppmResolved

Health-based violations only. 4 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5), fluoride, uranium and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Yucaipa Valley Water District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 10, 2023 to July 9, 2024; California’s results run from March 24, 2020 to June 17, 2026.

Testing your own tap

Yucaipa Valley Water District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Yucaipa Valley Water District’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Yucaipa Valley Water District’s results flag: nitrate, total trihalomethanes (TTHM) and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Yucaipa Valley Water District serves, or a kit by mail

The 3 labs California certifies closest to the area Yucaipa Valley Water District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • BSK Associates - San Bernardino Analytical Laboratory

    San Bernardino, CA · about 14 miles

    Certified for bacteria

    (559) 497-2888

  • Babcock Laboratories, Inc.

    Riverside, CA · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (951) 653-3351

  • Clinical Laboratory of San Bernardino, Inc.

    Grand Terrace, CA · about 17 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (909) 825-7693

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA3610055. Rebuilt from EPA data on Oct. 25, 2026.