Skip to content
TapBuff

Stanford University

EPA’s and California’s records have results for 37 contaminants in its water; 5 were found.

Serves 23,817 people · Surface water bought from another system · Stanford, CA · Hardness: very hard

Serves
23,817 people
Connections
1,483
Water source
Surface water bought from another system
Based in
Stanford, CA
County
Santa Clara
Owner
Private
Hardness
Very hard
The 2 ZIP codes it serves

94304, 94305

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

Filters for arsenic, if you want it lower⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 20, 2024 to Aug. 20, 2025.

Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, fluoride and chromium (total): California’s own results, samples taken from Jan. 8, 2020 to June 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 8.3 ppm

Highest sample; found in 51 of 51 · 2026 average: 2.9 ppm · Comes from the source

The highest sample, in 2020, was 8.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 9.7 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 43.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 35.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 43.9 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 105 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 59.2 ppb, in 2016, and EPA recorded a violation in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 49.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 45.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 49.3 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 88 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 72.5 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.8 ppb

Highest yearly average, 2020 to 2023 · 2023: not found · Comes from the source

Averaged by year, the highest was 2.8 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.3 ppb. In 2023, the latest year on file, it wasn’t found in any of its four samples.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.19 ppm

Highest yearly average, 2020 to 2023 · 2023 average: 0.17 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.19 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.2 ppm. In 2023, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2014.

What handles it

About fluoride
California utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for total Haloacetic Acids (HAA5). It began Oct. 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2016 to Dec. 31, 2016, 64 ppbResolved

Health-based violations only.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

One more filter
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Very hard, typically 395 mg/L (23.1 grains per gallon), across 5 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Stanford University reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 to 2025 sampling for EPA. It also reported ultraviolet light.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic, fluoride and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Stanford University’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 20, 2024 to Aug. 20, 2025; California’s results run from Jan. 8, 2020 to June 3, 2026.

Testing your own tap

Stanford University’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Stanford University’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs California certifies closest to the area Stanford University serves, or a kit by mail

The 3 labs California certifies closest to the area Stanford University serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • San Mateo County Public Health Laboratory

    San Mateo, CA · about 12 miles

    Certified for bacteria

    (650) 573-2500

  • AEMTEK, Inc

    Fremont, CA · about 15 miles

    Certified for bacteria, minerals and other inorganics

    (510) 979-1979

  • Torrent Laboratory, Inc

    Milpitas, CA · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (408) 263-5258

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA4310013. Rebuilt from EPA data on Oct. 25, 2026.