Santa Margarita Water District - Id9
EPA’s and California’s records have results for 38 contaminants in its water; 6 were found.
Serves 35,309 people · Surface water bought from another system · San Juan Capistrano, CA · Hardness: varies by source
- Serves
- 35,309 people
- Connections
- 11,010
- Water source
- Surface water bought from another system
- Based in
- San Juan Capistrano, CA
- County
- Orange
- Owner
- Local government
- Hardness
- Varies by source
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from June 5, 2024 to March 3, 2025.
Total trihalomethanes (TTHM), uranium, haloacetic acids (HAA5), nitrate, fluoride, arsenic and chromium (total): California’s own results, samples taken from Jan. 14, 2020 to May 4, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
57.4 ppb
Highest sample, June 5, 2024; found in 8 of 10
The highest sample was 57.4 ppb, about 5.7 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 36.7 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 31.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 36.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 46 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 50.6 ppb, in 2012.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 8.3 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 8.3 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.4 ppb. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 15.6 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 7.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 15.6 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 28.2 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 18.7 ppb, in 2012.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 1.6 ppm
Highest sample; found in 6 of 6 · 2020 average: 1.3 ppm · Comes from the source
The highest sample, in 2020, was 1.6 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its six samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm
Highest yearly average, 2020 · Forms or is added in treatment
Averaged by year, the highest was 0.26 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.28 ppm. That is the only year on file.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsHardness
Moderately hard to very hard depending on the source, 105 to 720 mg/L (6.1 to 42.1 grains per gallon), across 7 sampling points, 2019 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Santa Margarita Water District - Id9 reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2024 to 2025 sampling for EPA. It also reported ozone and ultraviolet light.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), uranium, haloacetic acids (HAA5), nitrate, fluoride, arsenic and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Santa Margarita Water District - Id9’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 5, 2024 to March 3, 2025; California’s results run from Jan. 14, 2020 to May 4, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Santa Margarita Water District - Id9’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Santa Margarita Water District - Id9’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area Santa Margarita Water District - Id9 serves, or a kit by mail
The 3 labs California certifies closest to the area Santa Margarita Water District - Id9 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Sierra Analytical Labs, Inc.
Laguna Hills, CA · about 6 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals
Onterris Laboratories, LLC
Orange, CA · about 25 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Envirocheck, Inc.
Orange, CA · about 25 miles
Certified for lead and copper
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportSanta Margarita Water District - Id9 must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from March 13, 2019 to May 6, 2025, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA3010030. Rebuilt from EPA data on Oct. 25, 2026.