Skip to content
TapBuff

San Bernardino Valley WD

EPA’s and California’s records have results for 6 contaminants in its water; 3 were found.

Serves 109,608 people · Groundwater · San Bernardino, CA · Hardness: very hard

Serves
109,608 people
Connections
1
Water source
Groundwater
Based in
San Bernardino, CA
County
San Bernardino
Owner
Local government
Hardness
Very hard
The ZIP code it serves

92373

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, not everything. No health-based violations on file since 2016.

Filters for uranium, if you want it lower⁠

What was found

Where these results come from, and when

Nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM): California’s own results, samples taken from Jan. 15, 2020 to July 7, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from July 19, 2012 to March 20, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 5.2 ppm

Highest sample; found in 128 of 128 · 2026 average: 3.4 ppm · Comes from the source

The highest sample, in 2020, was 5.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 13 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 9.0 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 6.4 ppb

Highest yearly average, 2012 to 2018 · Comes from the source

Averaged by year, the highest was 6.4 ppb, in 2018, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 12.5 ppb. That was also the latest year on file.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.39 ppm

Highest yearly average, 2021 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.39 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.35 ppm, in 2012.

What handles it

About fluoride
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Total trihalomethanes (TTHM)

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Every filter certified for it⁠

Hardness

Very hard, typically 248 mg/L (14.5 grains per gallon), across 2 sampling points, 2021 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. San Bernardino Valley WD’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Jan. 15, 2020 to July 7, 2026; EPA’s compliance samples are from July 19, 2012 to March 20, 2018.

Testing your own tap

San Bernardino Valley WD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
The 3 labs California certifies closest to the area San Bernardino Valley WD serves, or a kit by mail

The 3 labs California certifies closest to the area San Bernardino Valley WD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • BSK Associates - San Bernardino Analytical Laboratory

    San Bernardino, CA · about 7 miles

    Certified for bacteria

    (559) 497-2888

  • Babcock Laboratories, Inc.

    Riverside, CA · about 9 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (951) 653-3351

  • Clinical Laboratory of San Bernardino, Inc.

    Grand Terrace, CA · about 10 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (909) 825-7693

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA3610019. Rebuilt from EPA data on Oct. 25, 2026.