Skip to content
TapBuff

Riverdale Estates

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
300 people
Connections
186
Water source
Groundwater
Based in
Irvine, CA
County
Riverside
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

92201

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Uranium, nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM): California’s own results, samples taken from Jan. 3, 2020 to Jan. 6, 2026, with EPA’s 2012 to 2019 file for earlier years.

Haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Sept. 11, 2017 to Aug. 5, 2019. Newer results are in the utility’s annual water quality report.

Above the health goal1

Uranium

Comes from the source

Above the health goal

4.0ppb

Highest yearly average, 2021

Averaged by year, the highest was 4.0 ppb, in 2021: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That is the only year on file.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

5.5ppm

Highest sample; found in 10 of 10

2026, one sample: 3.4 ppm

The highest sample, in 2021, was 5.5 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was 3.4 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.1 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.56ppm

Highest yearly average, 2020 to 2023

2023, one sample: 0.49 ppm

Averaged by year, the highest was 0.56 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2023, the latest year on file, its one sample was 0.49 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.9 ppm, in 2013.

What handles it

5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Hardness

Moderately hard, 105 mg/L (6.1 grains per gallon), at its one sampling point, 2020 to 2023.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Uranium, nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Haloacetic acids (HAA5) comes from EPA’s file alone, which ends in 2019. Riverdale Estates’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Jan. 3, 2020 to Jan. 6, 2026; EPA’s compliance samples are from Sept. 11, 2017 to Aug. 5, 2019.

Testing your own tap

Riverdale Estates’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Riverdale Estates serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Brawley Analytical, Inc.

    Brawley, CA · about 64 miles

    Certified for bacteria, minerals and other inorganics

    (760) 623-1556

  • Babcock Laboratories, Inc.

    Riverside, CA · about 65 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity

    (951) 653-3351

  • BSK Associates - San Bernardino Analytical Laboratory

    San Bernardino, CA · about 66 miles

    Certified for bacteria

    (559) 497-2888

All 145 certified labs for California

Sources

PWSID CA3301040. Rebuilt from EPA data on Oct. 18, 2026.