Skip to content
TapBuff

Montecito Water Dist

EPA’s and California’s records have results for 38 contaminants in its water; 7 were found.

Serves 12,010 people · Surface water · Santa Barbara, CA · Hardness: very hard

Serves
12,010 people
Connections
4,672
Water source
Surface water
Based in
Santa Barbara, CA
County
Santa Barbara
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

93067, 93108

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for uranium, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 7, 2024 to June 17, 2025.

Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), uranium and arsenic: California’s own results, samples taken from Feb. 3, 2020 to June 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

56 ppb

Highest sample, March 4, 2025; found in 18 of 18

The highest sample was 56 ppb, about 5.6 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 9.9 ppm

Highest sample; found in 164 of 210 · 2026 average: 3.0 ppm · Comes from the source

The highest sample, in 2024, was 9.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 27 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11.1 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 37.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 23.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 37.1 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 74 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 36.9 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 46.4 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 29.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.4 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 79 ppb. In 2026, the latest year on file, its 26 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 69.9 ppb, in 2014, and EPA recorded a violation in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.63 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.2 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.63 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.3 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.64 ppm, in 2018.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 11.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 5.0 ppb · Comes from the source

Averaged by year, the highest was 11.7 ppb, in 2024, below EPA’s legal limit of 100 ppb. Its highest single sample was 31 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2014.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.7 ppb

Highest yearly average, 2026 · Comes from the source

Averaged by year, the highest was 1.7 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppb, in 2017.

What handles it

About uranium
California utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Every filter certified for it⁠

Hardness

Very hard, typically 365 mg/L (21.3 grains per gallon), across 7 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Montecito Water Dist reported disinfecting with chlorine, not chloramine, at all 7 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, chromium (total), uranium and arsenic results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Montecito Water Dist’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 7, 2024 to June 17, 2025; California’s results run from Feb. 3, 2020 to June 1, 2026.

Testing your own tap

Montecito Water Dist’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Montecito Water Dist’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Montecito Water Dist’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area Montecito Water Dist serves, or a kit by mail

The 3 labs California certifies closest to the area Montecito Water Dist serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Capco Analytical Services

    Ventura, CA · about 25 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics

    (805) 644-1095

  • Ventura County Public Health Laboratory

    Oxnard, CA · about 30 miles

    Certified for bacteria

    (805) 981-5131

  • Fruit Growers Laboratory, Inc.

    Santa Paula, CA · about 31 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (805) 392-2000

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA4210007. Rebuilt from EPA data on Oct. 25, 2026.