Skip to content
TapBuff

Montara Water and Sanitary District

EPA’s and California’s records have results for 37 contaminants in its water; 6 were found.

Serves 6,088 people · Surface water · Montara, CA · Hardness: varies by source

Serves
6,088 people
Connections
1,701
Water source
Surface water
Based in
Montara, CA
County
San Mateo
Owner
Local government
Hardness
Varies by source
The 3 ZIP codes it serves

94037, 94038, 94109

The short answer

None of the results here is above a limit in force today. Nitrate is above the health goal. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 11, 2025 to Jan. 26, 2026.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.6 ppm, for the period ending Dec. 31, 1999. None since is on file, so it is not counted as a current finding.

Nitrate, arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and chromium (total): California’s own results, samples taken from Jan. 6, 2020 to June 8, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the health goal, 1 result

Nitrate

Comes from the source

Above the health goal

13 ppm

Highest sample; found in 246 of 373

2026 average: 4.6 ppm

From 2021 to 2024, five samples were above EPA’s legal limit of 10 ppm, the highest 13 ppm in 2021. Four came back under the limit on the next sample at the same point and one has no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its seven samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11.8 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Below EPA’s limits, 5 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.5 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 2.4 ppb · Comes from the source

Averaged by year, the highest was 3.5 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 7.3 ppb. In 2025, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.0 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 25.8 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 14.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 25.8 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 50 ppb. In 2025, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 20.5 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.82 ppm

Highest yearly average, 2020 to 2025 · 2025 average: 0.59 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.82 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.6 ppm. In 2025, the latest year on file, its four samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2018.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 8.4 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 6.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 8.4 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 13 ppb. In 2025, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.8 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 3.8 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 3.8 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 15 ppb. In 2025, the latest year on file, it wasn’t found in any of its four samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 7.8 ppb, in 2013.

What handles it

About chromium (total)
California utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Arsenic

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft to very hard depending on the source, 55 to 240 mg/L (3.2 to 14 grains per gallon), across 13 sampling points, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Montara Water and Sanitary District reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2025 to 2026 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Montara Water and Sanitary District’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 11, 2025 to Jan. 26, 2026; California’s results run from Jan. 6, 2020 to June 8, 2026.

Testing your own tap

Montara Water and Sanitary District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Montara Water and Sanitary District’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Montara Water and Sanitary District’s results flag: nitrate. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area Montara Water and Sanitary District serves, or a kit by mail

The 3 labs California certifies closest to the area Montara Water and Sanitary District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Garratt-Callahan Laboratory

    Burlingame, CA · about 6 miles

    Certified for nitrate, metals, minerals and other inorganics

    (650) 697-5811

  • Eurofins Built Environment Testing West-Burlingame

    Burlingame, CA · about 7 miles

    Certified for bacteria

    (623) 298-1015

  • Cel Analytical, Inc.

    San Francisco, CA · about 11 miles

    Certified for bacteria, minerals and other inorganics

    (415) 882-1690

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA4110010. Rebuilt from EPA data on Oct. 25, 2026.