Skip to content
TapBuff

Keyes Community Services Dist.

EPA’s and California’s records have results for 37 contaminants in its water; 4 were found.

Serves 5,672 people · Groundwater · Keyes, CA · Hardness: varies by source

Serves
5,672 people
Connections
1,515
Water source
Groundwater
Based in
Keyes, CA
County
Stanislaus
Owner
Local government
Hardness
Varies by source
The 2 ZIP codes it serves

95307, 95328

The short answer

EPA recorded a violation of the legal limit for arsenic here in 2020. In 2026, the latest year on file, it averaged 7.7 ppb, below the limit. Nitrate averaged above its legal limit’s level in 2025, with no violation recorded. 17 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 17 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 3 to Oct. 4, 2023.

Lead and copper: EPA SDWIS monitoring periods ending 2021 to 2027.

Arsenic, nitrate, fluoride, chromium (total), haloacetic acids (HAA5) and total trihalomethanes (TTHM): California’s own results, samples taken from Jan. 7, 2020 to June 23, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

A legal-limit violation on record, below the limit in the latest year, 1 result

Arsenic

Comes from the source

Violation on record (2020)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

8.6 ppb

Highest yearly average, 2020 to 2026

2026 average: 7.7 ppb

Averaged by year, the highest was 8.6 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 18 ppb. In 2026, the latest year on file, its 28 samples averaged below the limit. EPA recorded a violation for arsenic at this utility in 2020.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 14.3 ppb, in 2018, and EPA recorded violations in 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Above the limit’s level, no violation recorded, 1 result

Nitrate

Comes from the source

Above the limit’s level, no violation

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

11.4 ppm

Highest sample; found in 148 of 152

2026 average: 2.7 ppm

From 2025 to 2026, seven samples were above EPA’s legal limit of 10 ppm, the highest 11.4 ppm in 2025. The next sample at the same point, within 30 days, kept the average above the limit for two; two came back under and three have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its 21 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 10.1 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Below EPA’s limits, 2 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.5 ppb

90th percentile, 2025 to 2027 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.5 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.17 ppm

Highest yearly average, 2020 to 2025 · 2025 average: 0.05 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.17 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.18 ppm. In 2025, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.4 ppm, in 2013.

What handles it

About fluoride
California utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Total trihalomethanes (TTHM)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Nitrate/Nitrite (30 ppm challenge), Lead Reduction

    For: Arsenic, Nitrate, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Nitrate/Nitrite Reduction, Lead Reduction

    For: Arsenic, Nitrate, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level); Nitrate

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Soft to moderately hard depending on the source, 53 to 112 mg/L (3.1 to 6.5 grains per gallon), across 4 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Keyes Community Services Dist. reported adding chloramine before water enters its pipes, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

17 health-based violations since 2016, all for arsenic. The latest began Jan. 1, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2020 to March 31, 2020, 10.3 ppbResolved
Oct. 1, 2019 to Dec. 31, 2019, 15 ppbResolved
July 1, 2019 to Sept. 30, 2019, 19 ppbResolved
April 1, 2019 to June 30, 2019, 16 ppbResolved
Jan. 1, 2019 to March 31, 2019, 15 ppbResolved
The other 12, back to 2016
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
ArsenicThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageSept. 1, 2018 to Nov. 30, 2018, 15 ppbResolved
July 1, 2018 to Sept. 30, 2018, 15 ppbResolved
April 1, 2018 to June 30, 2018, 15 ppbResolved
Jan. 1, 2018 to March 31, 2018, 14 ppbResolved
Oct. 1, 2017 to Dec. 31, 2017, 14.5 ppbResolved
July 1, 2017 to Sept. 30, 2017, 15 ppbResolved
April 1, 2017 to June 30, 2017, 15.5 ppbResolved
Jan. 1, 2017 to March 31, 2017, 16.5 ppbResolved
Oct. 1, 2016 to Dec. 31, 2016, 15.7 ppbResolved
July 1, 2016 to Sept. 30, 2016, 15 ppbResolved
April 1, 2016 to June 30, 2016, 15 ppbResolved
Jan. 1, 2016 to March 31, 2016, 14.5 ppbResolved

Health-based violations only.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, fluoride, chromium (total), haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Keyes Community Services Dist.’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 3 to Oct. 4, 2023; California’s results run from Jan. 7, 2020 to June 23, 2026.

Testing your own tap

Keyes Community Services Dist.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Keyes Community Services Dist.’s latest lead sampling in EPA’s records, 2025 to 2027, had a 90th percentile of 1.5 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Keyes Community Services Dist.’s results flag: arsenic and nitrate. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Keyes Community Services Dist. serves, or a kit by mail

The 3 labs California certifies closest to the area Keyes Community Services Dist. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Microbac Laboratories, Inc. - Turlock

    Turlock, CA · about 5 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (707) 822-4649

  • Certified Laboratories - Turlock

    Turlock, CA · about 5 miles

    Certified for bacteria

    (209) 664-1100

  • Aemtek, Inc.

    Modesto, CA · about 11 miles

    Certified for bacteria

    (510) 979-1979

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA5010009. Rebuilt from EPA data on Oct. 25, 2026.