Julian Community Services District
What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 617 people
- Connections
- 189
- Water source
- Groundwater
- Based in
- Julian, CA
- County
- San Diego
- Owner
- Local government
- Hardness
- Moderately hard
The ZIP code it serves
The short answer
1 result is above the health goal. The worst: Uranium, above the health goal. 1 health-based violation since 2016.
What handles itWhat was found
Lead and copper: copper at 177 mg/L (2018) is left out of this report: more than 20 times the action level, it looks like µg/L entered as mg/L.
Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic and chromium (total): California’s own results, samples taken from Feb. 12, 2020 to May 26, 2026, with EPA’s 2012 to 2019 file for earlier years.
Uranium: EPA’s compliance monitoring file, samples taken from May 20, 2015 to Jan. 17, 2018. Newer results are in the utility’s annual water quality report.
Above the health goal1
Uranium
Comes from the source
0.15ppb
Highest yearly average, 2015 to 2018
Averaged by year, the highest was 0.15 ppb, in 2018: below EPA’s legal limit of 30 ppb, but above its health goal of zero. That was also the latest year on file.
What handles it
- NSF/ANSI 58 look for “Uranium”
Below EPA’s limits4
Nitrate
Comes from the source
6.6ppm
Highest sample; found in 51 of 95
2026 average: 0.31 ppm
The highest sample, in 2023, was 6.6 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged 0.31 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 6.1 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM)
Forms or is added in treatment
10ppb
Highest yearly average, 2020 to 2025
Averaged by year, the highest was 10 ppb, in 2025, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 7.4 ppb, in 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
5.2ppb
Highest yearly average, 2020 to 2025
2025, one sample: 1.4 ppb
Averaged by year, the highest was 5.2 ppb, in 2024, below EPA’s legal limit of 60 ppb. In 2025, the latest year on file, its one sample was 1.4 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppb, in 2017.
What handles it
No certification claim covers this compound yet.
Fluoride
Forms or is added in treatment
0.13ppm
Highest yearly average, 2023
Averaged by year, the highest was 0.13 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.2 ppm. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.28 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsHardness
Moderately hard, 106 mg/L (6.2 grains per gallon), at its one sampling point, in 2023.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Violations since 2016
| Contaminant or rule | Type | Period | Measured | Status |
|---|---|---|---|---|
| Lead and Copper Rule Revisions | The required inventory of lead service lines was not completed or submitted on time.EPA: LSL Inventory | Oct. 17, 2024 | — | Unaddressed |
| Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 6 monitoring or reporting violations not shown. | ||||
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Julian Community Services District’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Feb. 12, 2020 to May 26, 2026; EPA’s compliance samples are from May 20, 2015 to Jan. 17, 2018.
Testing your own tap
The 3 labs California certifies closest to the area Julian Community Services District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
EMSL Analytical, Inc.
San Diego, CA · about 40 miles
Certified for bacteria
Analytical Environmental Lab, LLC
San Diego, CA · about 40 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, disinfection byproducts
Environmental Laboratory Network, Inc.
San Diego, CA · about 41 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from Dec. 27, 2023 to Dec. 27, 2023, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA3700909. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Read up on UraniumWhat each one does to health, where it comes from, and the certification claim that addresses it.About Uranium
- Get the utility’s own reportJulian Community Services District must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Compare certified filtersWhat the filters certified for these results cost over five years, cartridges included.Compare five-year costs