Skip to content
TapBuff

Elkins Ranch

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
150 people
Connections
43
Water source
Surface water
Based in
Fillmore, CA
County
Ventura
Owner
Private
Hardness
Moderately hard
The ZIP code it serves

93015

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. 2 health-based violations since 2016.

What handles it

What was found

Arsenic, nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and chromium (total): California’s own results, samples taken from Aug. 3, 2020 to Sept. 19, 2025, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

2.0ppb

Highest yearly average, 2022 to 2025

Averaged by year, the highest was 2.0 ppb, in 2025: below EPA’s legal limit of 10 ppb, but above its health goal of zero. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 2.0 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits4

Nitrate

Comes from the source

Below EPA’s limits

2.1ppm

Highest sample; found in 5 of 5

2025, one sample: 1.7 ppm

The highest sample, in 2022, was 2.1 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its one sample was 1.7 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.4 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

9.0ppb

Highest yearly average, 2020 to 2025

2025: not found

Averaged by year, the highest was 9.0 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 11 ppb. In 2025, the latest year on file, it wasn’t found in any of its three samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 12.3 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.3ppm

Highest yearly average, 2022 to 2025

2025, one sample: 0.2 ppm

Averaged by year, the highest was 0.3 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its one sample was 0.2 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.2 ppm, in 2013.

What handles it

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

3.5ppb

Highest yearly average, 2020 to 2025

2025: not found

Averaged by year, the highest was 3.5 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 7.0 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 6.5 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Lead

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Hardness

Moderately hard, 100 mg/L (5.8 grains per gallon), at its one sampling point, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Oct. 1, 2025 to Oct. 31, 2025—Archived
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024—Unaddressed
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 2 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Elkins Ranch’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from Aug. 3, 2020 to Sept. 19, 2025.

Testing your own tap

Elkins Ranch’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Elkins Ranch serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Fruit Growers Laboratory, Inc.

    Santa Paula, CA · about 12 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (805) 392-2000

  • Camrosa Water District Wastewater Laboratory

    Camarillo, CA · about 19 miles

    Certified for bacteria

    (805) 248-0402

  • Ventura County Public Health Laboratory

    Oxnard, CA · about 19 miles

    Certified for bacteria

    (805) 981-5131

All 145 certified labs for California

Sources

PWSID CA5601134. Rebuilt from EPA data on Oct. 18, 2026.