Skip to content
TapBuff

Delhi CWD

EPA’s and California’s records have results for 38 contaminants in its water; 7 were found.

Serves 7,784 people · Groundwater · Delhi, CA · Hardness: varies by source

Serves
7,784 people
Connections
2,423
Water source
Groundwater
Based in
Delhi, CA
County
Merced
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

95315

The short answer

None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. Nitrate is above the health goal. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from May 5, 2025 to Jan. 6, 2026.

Nitrate, arsenic, uranium, fluoride, total trihalomethanes (TTHM), chromium (total) and haloacetic acids (HAA5): California’s own results, samples taken from Jan. 14, 2020 to May 26, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOS and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

7.3 ppt

Highest sample, May 5, 2025; found in 1 of 8

The highest sample was 7.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.6 ppt, below it.

What handles it

Above the health goal, 1 result

Nitrate

Comes from the source

Above the health goal

13.1 ppm

Highest sample; found in 83 of 83

2026 average: 2.5 ppm

From 2020 to 2025, three samples were above EPA’s legal limit of 10 ppm, the highest 13.1 ppm in 2022. Every one came back under the limit on the next sample at the same point. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its seven samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Below EPA’s limits, 5 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFHxS, EPA’s 2029 limit 10 ppt; highest 8.0 ppt

Highest sample, May 5, 2025; found in 2 of 8 · Comes from the source

The highest sample was 8.0 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 6.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.7 ppb · Comes from the source

Averaged by year, the highest was 6.7 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 10.9 ppb. In 2026, the latest year on file, its two samples averaged below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 8.9 ppb, in 2016.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 14.3 ppb

Highest yearly average, 2021 to 2022 · Comes from the source

Averaged by year, the highest was 14.3 ppb, in 2022, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 22.4 ppb, in 2018.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.13 ppm

Highest yearly average, 2020 to 2024 · Forms or is added in treatment

Averaged by year, the highest was 0.13 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.1 ppm, in 2018.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.2 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 1.2 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 3.6 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.19 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 8 samples, below 4 ppt
PFOS4.0 pptA sample above EPA’s 2029 limit7.3 ppt highest, found in 1 of 8 samples. Details
PFHxS10 pptBelow EPA’s limits8.0 ppt highest, found in 2 of 8 samples. Details
PFNA10 pptNot foundNot found in any of 8 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 8 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 8 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, Nitrate, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: PFOS, Nitrate, Arsenic, Uranium

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft to hard depending on the source, 43 to 157 mg/L (2.5 to 9.2 grains per gallon), across 5 sampling points, 2020 to 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Delhi CWD reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2025 to 2026 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There is 1 monitoring or reporting violation: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, uranium, fluoride, total trihalomethanes (TTHM), chromium (total) and haloacetic acids (HAA5) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Delhi CWD’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from May 5, 2025 to Jan. 6, 2026; California’s results run from Jan. 14, 2020 to May 26, 2026.

Testing your own tap

Delhi CWD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Delhi CWD’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Delhi CWD’s results flag: PFOS and nitrate. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Delhi CWD serves, or a kit by mail

The 3 labs California certifies closest to the area Delhi CWD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Microbac Laboratories, Inc. - Turlock

    Turlock, CA · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (707) 822-4649

  • Certified Laboratories - Turlock

    Turlock, CA · about 8 miles

    Certified for bacteria

    (209) 664-1100

  • Aemtek, Inc.

    Modesto, CA · about 23 miles

    Certified for bacteria

    (510) 979-1979

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA2410006. Rebuilt from EPA data on Oct. 25, 2026.