Skip to content
TapBuff

City of Vacaville

EPA’s and California’s records have results for 38 contaminants in its water; 12 were found.

Serves 99,650 people · Surface water · Vacaville, CA · Hardness: varies by source

Serves
99,650 people
Connections
30,935
Water source
Surface water
Based in
Vacaville, CA
County
Solano
Owner
Local government
Hardness
Varies by source
The 3 ZIP codes it serves

95625, 95687, 95688

The short answer

None of the results here is above a limit in force today. PFOS is above EPA’s new limit, which takes effect in 2029. PFOA had a sample above it, but not on average, the way EPA will judge it. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Nov. 15, 2023 to Sept. 11, 2025.

Total trihalomethanes (TTHM), nitrate, arsenic, haloacetic acids (HAA5), fluoride, chromium (total) and uranium: California’s own results, samples taken from Jan. 7, 2020 to May 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOS

Comes from the source

Above EPA’s new limit (2029)

10 ppt

Highest sample, May 8, 2024; found in 2 of 21

The highest sample was 10 ppt, about 2.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 9.9 ppt, also above it.

What handles it

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

5.1 ppt

Highest sample, May 8, 2024; found in 1 of 21

The highest sample was 5.1 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.5 ppt, below it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

45 ppb

Highest sample, Nov. 15, 2023; found in 14 of 21

The highest sample was 45 ppb, about 4.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 9 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 ppt; highest 9.2 ppt

Highest sample, Feb. 14, 2024; found in 3 of 21 · Comes from the source

The highest sample was 9.2 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 37 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 33.1 ppb · Forms or is added in treatment

Averaged by year, the highest was 37 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 80 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 62 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 3.8 ppm

Highest sample; found in 68 of 124 · 2026 average: 0.61 ppm · Comes from the source

The highest sample, in 2022, was 3.8 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.8 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 2.1 ppb · Comes from the source

Averaged by year, the highest was 3.5 ppb, in 2022, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 8.4 ppb. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.4 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 13.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 12.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 13.7 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 44 ppb. In 2026, the latest year on file, its 17 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.5 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.23 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.26 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.88 ppm. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.33 ppm, in 2012.

What handles it

About fluoride
Chromium (total), Legal limit 100 ppb; highest yearly average 6.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.3 ppb · Comes from the source

Averaged by year, the highest was 6.5 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 37.6 ppb. In 2026, the latest year on file, its 11 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 19.2 ppb, in 2016.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.5 ppb

Highest yearly average, 2021 to 2026 · Comes from the source

Averaged by year, the highest was 1.5 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.4 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.94 ppb, in 2018.

What handles it

About uranium
PFBS, Health benchmark 2,000 ppt; highest 3.7 ppt

Highest sample, May 8, 2024; found in 2 of 21 · Comes from the source

The highest sample was 3.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit5.1 ppt highest, found in 1 of 21 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)10 ppt highest, found in 2 of 21 samples. Details
PFHxS10 pptBelow EPA’s limits9.2 ppt highest, found in 3 of 21 samples. Details
PFNA10 pptNot foundNot found in any of 21 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 21 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.7 ppt highest, found in 2 of 21 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.92 at its highest sampling location, Well 5
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: PFOS, PFOA, Arsenic, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Moderately hard to very hard depending on the source, 70 to 301 mg/L (4.1 to 17.6 grains per gallon), across 17 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Vacaville reported disinfecting with chlorine, not chloramine, at all 9 of its sampling points, in its 2023 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, arsenic, haloacetic acids (HAA5), fluoride, chromium (total) and uranium results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Vacaville’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 15, 2023 to Sept. 11, 2025; California’s results run from Jan. 7, 2020 to May 19, 2026.

Testing your own tap

City of Vacaville’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Vacaville’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Vacaville’s results flag: PFOS, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area City of Vacaville serves, or a kit by mail

The 3 labs California certifies closest to the area City of Vacaville serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Napa-Solano-Yolo-Marin Public Health Laboratory

    Fairfield, CA · about 11 miles

    Certified for bacteria

    (707) 784-4410

  • Caltest Analytical Laboratory

    Napa, CA · about 19 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (707) 258-4000

  • McCampbell Analytical, Inc.

    Pittsburg, CA · about 24 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (925) 252-9262

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA4810008. Rebuilt from EPA data on Oct. 25, 2026.