Skip to content
TapBuff

City of Norco

EPA’s and California’s records have results for 38 contaminants in its water; 14 were found.

Serves 25,068 people · Surface water bought from another system · Norco, CA · Hardness: varies by source

Serves
25,068 people
Connections
7,100
Water source
Surface water bought from another system
Based in
Norco, CA
County
Riverside
Owner
Local government
Hardness
Varies by source
The ZIP code it serves

92860

The short answer

EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2025. In 2026, the latest year on file, it averaged 3.5 ppb, below the limit. Arsenic averaged above its legal limit’s level in 2026, with no violation recorded. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Nitrate is above the health goal. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Sept. 12, 2023 to June 18, 2024.

Total trihalomethanes (TTHM), arsenic, nitrate, fluoride, uranium, haloacetic acids (HAA5) and chromium (total): California’s own results, samples taken from Jan. 7, 2020 to June 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFBA at 17.9 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2025)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

31.9 ppb

Highest yearly average, 2020 to 2026

2026 average: 3.5 ppb

Averaged by year, the highest was 31.9 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 120 ppb. In 2026, the latest year on file, its 10 samples averaged below the limit. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2025.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 26.4 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Above the limit’s level, no violation recorded, 1 result

Arsenic

Comes from the source

Above the limit’s level, no violation

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A filter certified for it, at the tap you drink from, reduces it.

13.1 ppb

Highest yearly average, 2020 to 2026

Averaged by year, the highest was 13.1 ppb, in 2026, above EPA’s legal limit of 10 ppb. Its highest single sample was 31 ppb. That was also the latest year on file. EPA recorded no violation for arsenic at this utility since 2020.

How it’s judged

EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.1 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

31.4 ppt

Highest sample, March 20, 2024; found in 4 of 14

The highest sample was 31.4 ppt, about 7.9 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 22.4 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

13.7 ppt

Highest sample, March 20, 2024; found in 3 of 14

The highest sample was 13.7 ppt, about 3.4 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.5 ppt, also above it.

What handles it

Above the health goal, 1 result

Nitrate

Comes from the source

Above the health goal

11 ppm

Highest sample; found in 232 of 442

2026 average: 0.2 ppm

One sample, in 2021, was above EPA’s legal limit of 10 ppm, at 11 ppm. No follow-up sample at that point within 30 days is on file. 10 ppm is also EPA’s health goal. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 15.4 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

35.9 ppb

Highest sample, Sept. 12, 2023; found in 8 of 14

The highest sample was 35.9 ppb, about 3.6 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFHxS, EPA’s 2029 limit 10 pptAt EPA’s limit, as EPA rounds; highest 13.8 ppt

Highest sample, March 20, 2024; found in 6 of 14 · Comes from the source

The highest sample was 13.8 ppt. As EPA rounds results, that is at EPA’s new limit of 10 ppt, which takes effect in 2029, not above it: EPA counts a result as above it from 15 ppt.

How it’s judged

Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.2 ppt, at it as EPA rounds results, not above it.

What handles it

About PFHxS
Fluoride, Legal limit 4.0 ppm; highest yearly average 2.8 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 1.1 ppm · Forms or is added in treatment

Averaged by year, the highest was 2.8 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 3.2 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.3 ppm, in 2014.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 8.9 ppb

Highest yearly average, 2020 to 2024 · Comes from the source

Averaged by year, the highest was 8.9 ppb, in 2024, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 16.4 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.0 ppb, in 2017.

What handles it

About uranium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 6.9 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 6.9 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 28.6 ppb. In 2026, the latest year on file, it wasn’t found in any of its 10 samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.7 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 12.2 ppt

Highest sample, March 20, 2024; found in 4 of 14 · Comes from the source

The highest sample was 12.2 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)13.7 ppt highest, found in 3 of 14 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)31.4 ppt highest, found in 4 of 14 samples. Details
PFHxS10 pptAt EPA’s limit, as EPA rounds13.8 ppt highest, found in 6 of 14 samples. Details
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits12.2 ppt highest, found in 4 of 14 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits1.02 at its highest sampling location, Well #12. EPA compares it at one significant digit, so it rounds to 1, at the limit, not above it
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA17.9 ppt3 of 14None covers it
PFPeA11.9 ppt5 of 14None covers it
PFHxA7.3 ppt5 of 14None covers it
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, PFOS Reduction, PFOA Reduction, Nitrate/Nitrite (30 ppm challenge)

    For: Total trihalomethanes (TTHM), Arsenic, PFOS, PFOA, Nitrate

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: VOC Reduction; Arsenic (III) (50 ppb influent level); Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Nitrate/Nitrite Reduction, Uranium

    For: Total trihalomethanes (TTHM), Arsenic, PFOS, PFOA, Nitrate, Uranium

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level); Nitrate

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 5 first⁠

The best water filters for TTHM, ranked⁠

The best reverse osmosis systems, ranked⁠

The best water filters for PFAS, ranked⁠

Hardness

Soft to very hard depending on the source, 38 to 255 mg/L (2.2 to 14.9 grains per gallon), across 4 sampling points, 2020 to 2024.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Norco reported chloramine at 1 of its 6 sampling points and chlorine without chloramine at 5, in its 2023 to 2024 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for TTHM. It began July 1, 2025.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2025 to Sept. 30, 2025, 83 ppbResolved

Health-based violations only. 42 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), arsenic, nitrate, fluoride, uranium, haloacetic acids (HAA5) and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Norco’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 12, 2023 to June 18, 2024; California’s results run from Jan. 7, 2020 to June 1, 2026.

Testing your own tap

City of Norco’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Norco’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Norco’s results flag: total trihalomethanes (TTHM), arsenic, PFOS, PFOA and 2 more. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area City of Norco serves, or a kit by mail

The 3 labs California certifies closest to the area City of Norco serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • A & R Laboratories, Inc.

    Ontario, CA · about 9 miles

    Certified for bacteria

    (951) 779-0310

  • Western Analytical Laboratories, Inc.

    Chino, CA · about 10 miles

    Certified for bacteria, minerals and other inorganics

    (909) 627-3628

  • Enviro-Chem, Inc.

    Pomona, CA · about 13 miles

    Certified for metals

    (909) 590-5905

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA3310025. Rebuilt from EPA data on Oct. 25, 2026.