Skip to content
TapBuff

City of Mountain View

EPA’s and California’s records have results for 38 contaminants in its water; 5 were found.

Serves 81,340 people · Surface water bought from another system · Mountain View, CA · Hardness: very hard

Serves
81,340 people
Connections
17,968
Water source
Surface water bought from another system
Based in
Mountain View, CA
County
Santa Clara
Owner
Local government
Hardness
Very hard
The 6 ZIP codes it serves

94035, 94039, 94040, 94041, 94042, 94043

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 8 to Dec. 6, 2023.

Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, arsenic and chromium (total): California’s own results, samples taken from Feb. 12, 2020 to June 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from May 15, 2013 to May 15, 2013. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppb; highest 9.3 ppb

Highest sample, March 8, 2023; found in 1 of 16 · Comes from the source

The highest sample was 9.3 ppb, below EPA’s health reference level of 10 ppb. Lithium has no legal limit or health goal of its own.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 55.2 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 41.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 55.2 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 87.8 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 58 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 6.7 ppm

Highest sample; found in 105 of 105 · 2026 average: 5.1 ppm · Comes from the source

The highest sample, in 2023, was 6.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 7.2 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 37.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 18.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 37.7 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 86.9 ppb. In 2026, the latest year on file, its 16 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 42.3 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.12 ppm

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.12 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.13 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.22 ppm, in 2014.

What handles it

About fluoride
California utilities above EPA’s PFAS limits⁠
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Very hard, typically 269 mg/L (15.7 grains per gallon), across 4 sampling points, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

City of Mountain View reported chloramine at 2 of its 6 sampling points and chlorine without chloramine at 0, and no disinfectant at 4, in its 2023 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported another disinfectant.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), fluoride, arsenic and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. City of Mountain View’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 8 to Dec. 6, 2023; California’s results run from Feb. 12, 2020 to June 3, 2026; EPA’s compliance samples are from May 15 to 15, 2013.

Testing your own tap

City of Mountain View’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Mountain View’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs California certifies closest to the area City of Mountain View serves, or a kit by mail

The 3 labs California certifies closest to the area City of Mountain View serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • AEMTEK, Inc

    Fremont, CA · about 10 miles

    Certified for bacteria, minerals and other inorganics

    (510) 979-1979

  • Torrent Laboratory, Inc

    Milpitas, CA · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS

    (408) 263-5258

  • San Mateo County Public Health Laboratory

    San Mateo, CA · about 15 miles

    Certified for bacteria

    (650) 573-2500

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA4310007. Rebuilt from EPA data on Oct. 25, 2026.