City of Kerman
EPA’s and California’s records have results for 38 contaminants in its water; 7 were found.
Serves 17,256 people · Groundwater · Kerman, CA · Hardness: varies by source
- Serves
- 17,256 people
- Connections
- 4,094
- Water source
- Groundwater
- Based in
- Kerman, CA
- County
- Fresno
- Owner
- Local government
- Hardness
- Varies by source
The ZIP code it serves
The short answer
Uranium averaged above its legal limit’s level in 2022, with no violation recorded. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from June 21, 2024 to Sept. 30, 2025.
Uranium, nitrate, arsenic, chromium (total), haloacetic acids (HAA5), fluoride and total trihalomethanes (TTHM): California’s own results, samples taken from March 31, 2020 to April 7, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above the limit’s level, no violation recorded, 1 result
Uranium
Comes from the source
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A filter certified for it, at the tap you drink from, reduces it.
83.9 ppb
Highest yearly average, 2020 to 2026
2026 average: 21.7 ppb
Averaged by year, the highest was 83.9 ppb, in 2022, about 2.8 times EPA’s legal limit of 30 ppb. Its highest single sample was 121 ppb. In 2026, the latest year on file, its three samples averaged below the limit. EPA recorded no violation for uranium at this utility since 2020.
How it’s judged
EPA judges this limit on running averages at each sampling point. Results like these with no violation often include water sampled before treatment or blending; the utility’s annual report says what reaches the tap.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 26.8 ppb, in 2019.
What handles it
- NSF/ANSI 58 look for “Uranium”
Below EPA’s limits, 6 results
Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 6.4 ppm
Highest sample; found in 67 of 67 · 2026 average: 1.9 ppm · Comes from the source
The highest sample, in 2022, was 6.4 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 4.7 ppm, in 2019.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 6.2 ppb
Highest yearly average, 2021 to 2024 · Comes from the source
Averaged by year, the highest was 6.2 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 7.6 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 6.1 ppb, in 2018.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Chromium (total), Legal limit 100 ppb; highest yearly average 31.7 ppb
Highest yearly average, 2021 to 2024 · 2024 average: 27.4 ppb · Comes from the source
Averaged by year, the highest was 31.7 ppb, in 2021, below EPA’s legal limit of 100 ppb. Its highest single sample was 84 ppb. In 2024, the latest year on file, its five samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 27.2 ppb, in 2015.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.0 ppb
Highest yearly average, 2020 to 2025 · Forms or is added in treatment
Averaged by year, the highest was 4.0 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 16 ppb. That was also the latest year on file.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.13 ppm
Highest yearly average, 2021 to 2024 · 2024 average: 0.028 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.13 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.15 ppm. In 2024, the latest year on file, its five samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.14 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.15 ppb
Highest yearly average, 2020 to 2025 · Forms or is added in treatment
Averaged by year, the highest was 0.15 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 0.62 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.14 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claim: Arsenic (Pentavalent)<=50 ppb Reduction
For: Arsenic
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Uranium, Arsenic (Pentavalent)<=50 ppb Reduction
For: Uranium, Arsenic
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for arsenic only, found below its limits
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for arsenic only, found below its limits
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for arsenic only, found below its limits
One more filter
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for arsenic only, found below its limits
Hardness
Soft to moderately hard depending on the source, 19 to 112 mg/L (1.1 to 6.5 grains per gallon), across 6 sampling points, 2021 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
City of Kerman reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2024 to 2025 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Uranium, nitrate, arsenic, chromium (total), haloacetic acids (HAA5), fluoride and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Kerman’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 21, 2024 to Sept. 30, 2025; California’s results run from March 31, 2020 to April 7, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Kerman’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What City of Kerman’s results flag: uranium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs California certifies closest to the area City of Kerman serves, or a kit by mail
The 3 labs California certifies closest to the area City of Kerman serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Dellavalle Laboratory, Inc.
Fresno, CA · about 16 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity
Moore Twining Associates, Inc.
Fresno, CA · about 19 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity
BSK Associates
Fresno, CA · about 25 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on uraniumWhat it does to health, where it comes from, and the certification claim that addresses it.About uranium
- Get the utility’s own reportCity of Kerman must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- California State Water Resources Control Board, Division of Drinking Water, results from Jan. 1, 2020 to July 17, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: California State Water Resources Control Board, ELAP accredited laboratories and their fields of accreditation, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: California State Water Resources Control Board, Division of Drinking Water, results from March 30, 2021 to March 13, 2025, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID CA1010018. Rebuilt from EPA data on Oct. 25, 2026.